Sony SRF-A100 - HOW TO USE; POWER SWITCH AND BAND SELECTOR; AM STEREO MODE SELECTION

www.SteamPoweredRadio.Com
HOW TO USE
Follow the steps 1 lo 6 fn sequence to tune in the station .
1 POWER switch
Depress to turn on the power(,, ON).
To turn the receiver off, press it agafn (o OF F).
2 BAND sel ecto r
Select the desired band.
FM ST: For FM reception, set It to this po sition.
The receiver operates
in st ereo mode for FM stereo pro•
grams and
will automatically switch to mono for monaural
programs.
AM ST: For AM stereo program reception. The receiver aper•
ates in stereo mode for AM stereo programs.
AM : For AM monaural program reception. When ii Is hard to
hear the AM stereo program due to noise. set it to t his posi•
lion.
3 AM ST MOOE (AM stereo mode) selector
Set
it to the appropriate position acco r ding to the AM stereo
broadcasting system being used.
A: For Harris, Magnavox or Mot orola System
B: For Kahn Hazel tine Syst em
II you do not know which syst em is b eing used, you can deter•
mine the appropriate position of t his selector by compar ing Ille
quali ty of t he ster eo reception at each positio n.