Sony SRF-R405 - Section 2 Disassembly; Cabinet (Rear) Assy; Main Board

— 3 —
SECTION 2
DISASSEMBLY
2-1. CABINET (REAR) ASSY
Note : Follow the disassembly procedure in the numerical order given.
Note : On installation of cabinet (rear), adjust the knob (earphone/speaker) and switch positions until they agree.
1 Open the lid, battery case
7 Cabinet (rear) assy
6 Open the cabinet from
the recessed areas.
(Remove the 9 claws.)
Claws
Claws
Claws
Knob (EAR/SP)
Switch
Claws
3 Open the lid, ear-phon
e
2 Screw (M1.7 × 5)
4 Screw (M1.7 × 5)
5 Screw (M1.4 × 10)
2-2. MAIN BOARD
Note : On installation of cabinet (rear), adjust the knob (earphone/speaker) and switch positions until they agree.
4 Screw (B1.4 × 6)
5 Claw
Switch
1 Knob(HOLD)
7 Button(NOISE CUT
)
8 Spring compression
6 Main board
2 Remove two solders
of terminal, battery.
3 Remove two solders
of speaker leads.