Need help?Do you have a question about the Sony SS-NA5ES and is the answer not in the manual?
Identifies the main tweeter unit, assist tweeter unit, and woofer unit on the front of the speaker.
Identifies the enclosure, duct, and terminals on the rear of the speaker.
Describes the grille frame and its attachment to the speaker.
Provides important notes on speaker usage, including diaphragm care and enclosure appearance.
Details optimal speaker placement for high-quality sound, including distance and height.
Lists locations to avoid for speaker placement to prevent damage or performance degradation.
Guidance on choosing compatible amplifiers and speaker cords based on impedance and fittings.
Instructions for connecting speaker terminals to the amplifier, emphasizing secure binding posts.
Recommendation to play speakers at normal volume for about 10 hours to break them in.
Provides detailed technical specifications for the speaker system and its components.
Procedure to set the amplifier volume to minimum before turning on/off components.
Advice for indefinite sound positions or unclear bass, focusing on correct cord connection.
Instructions for cleaning the speaker enclosure using appropriate materials.
Warnings against modifying speaker units and advice to reduce volume if distortion occurs.
Lists signals to avoid inputting continuously to prevent damage to speaker circuits.
Identifies the main tweeter unit, assist tweeter unit, and woofer unit on the front of the speaker.
Identifies the enclosure, duct, and terminals on the rear of the speaker.
Describes the grille frame and its attachment to the speaker.
Provides important notes on speaker usage, including diaphragm care and enclosure appearance.
Details optimal speaker placement for high-quality sound, including distance and height.
Lists locations to avoid for speaker placement to prevent damage or performance degradation.
Guidance on choosing compatible amplifiers and speaker cords based on impedance and fittings.
Instructions for connecting speaker terminals to the amplifier, emphasizing secure binding posts.
Recommendation to play speakers at normal volume for about 10 hours to break them in.
Provides detailed technical specifications for the speaker system and its components.
Procedure to set the amplifier volume to minimum before turning on/off components.
Advice for indefinite sound positions or unclear bass, focusing on correct cord connection.
Instructions for cleaning the speaker enclosure using appropriate materials.
Warnings against modifying speaker units and advice to reduce volume if distortion occurs.
Lists signals to avoid inputting continuously to prevent damage to speaker circuits.
General| Sensitivity | 88 dB |
|---|---|
| Impedance | 6 ohms |
| Woofer | 16 cm (6.3 in) cone |
| Tweeter | 2.5 cm (1 in) dome |
| Super Tweeter | 19 mm soft dome |
| Weight | 25 kg |
To Next Page
