Sony ST-A35L - Page 5

ST-A35|
ep)
DIAL CORD STRINGING
1) Preparation
775mm (30% inches}
oe)
am)
ns
dial cord, 0.3mm dia ee
@ Squeeze here.
™
Q Tie the dial cord.
i /
tf te)
a
oe
=
@ Hook the spring. —=—@ Apply a drop of contact cement
to the dial cord.
ike)
2) Stringing
Turn the tuning capacitor shaft fully clockwise and
set the dial drum so that the cutout is positioned as =
shown below. : 5)
“
dial pointer freer = i
*
String
the
dial
cord
through
these cut portion.
ioe)
flywheel Or
~~ @
4
@)
Hook
the
spring.
Lo
eS
@ Hold the dial cord not
tO
Sac
herrete.
be
Cry
X\\
Note:
Dial
drum
rotates
in
the
opposite
5
cutout
|
direction of the tuning capacitor
by joint of the gear.
@ Wind the dial cord two turns.
3) Dial Pointer Installation ic $
1. Receive a broadcasting station signal and set the oo a)
dial pointer on the dial scale.
2. Apply a drop of contact cement to the dial
pointer (marked (A) ).