Need help?Do you have a question about the Sony ST-SA3ES and is the answer not in the manual?
General| FM Tuning Range | 87.5 - 108 MHz |
|---|---|
| Signal-to-Noise Ratio (AM) | 50 dB |
| Total Harmonic Distortion (FM) | 0.1% |
| Total Harmonic Distortion (AM) | 0.3% |
| Output (AM) | 150mV |
| Type | FM/AM |
| AM Tuning Range | 531 - 1602 kHz |
| Sensitivity (AM) | 20 µV/m |
| Signal-to-Noise Ratio (FM) | 80 dB |
| Frequency Response (FM) | 20 Hz - 15 kHz |
| Dimensions | 430 x 340 mm |
Describes the buttons, display, and knobs on the front panel.
Outlines the steps for performing a circuit check.
Steps for tuning FM discriminator for null and mono distortion.
Adjusting front-end IFT for optimal stereo distortion.
Procedure to set the stereo indicator level.
Adjustments for narrow band gain and signal meter.
Steps to optimize stereo channel separation.
Calibrating the AM signal meter.
To Next Page
