Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Configuring various input settings (Settings1)
You can customize the settings for each input according to your preferences and usage.
Preset Sound Field
You can assign a default “Sound Field” to each input source that will be selected automatically when you select the input source.
In-Ceiling Speaker Mode
You can select whether or not to use the In-Ceiling Speaker Mode with the current input.
A/V Sync
You can delay the output of audio to minimize the time gap between audio output and visual display.
Subwoofer Low Pass Filter
You can turn on or off the low-pass filter for the subwoofer output. The low-pass filter works when PCM signals are input via an HDMI connection. You can set the function for each
input to which an HDMI input jack is assigned independently. Turn the function on if you connect a subwoofer without the crossover frequency function.
5-037-021-11(1) Copyright 2022 Sony Corporation
Select [Setup] - [Input Settings] - [Settings1] from the home menu, then set each item shown below.
1
To Next Page
Loading...
