Sony STR-AZ3000ES - Discrete Code Transmission (Main Zone)

41
EN
Using the hidden commands
Turning on transmitting mode of the discrete code for the main zone
While holding down MAIN, press CUSTOM1 on the remote control for 5seconds.
Transmitting mode of the discrete code for the main zone is activated when MAIN starts
flashing.
Command list in transmitting mode of the discrete code for the main zone
Key name Transmitting mode of the discrete
code (main)
Code name
ZONE2 
POWER ON (ZONE2)
ZONE3 
POWER ON (ZONE3)
MAIN 
POWER ON
ZONE 2
(illuminated in red)
ZONE 2
(illuminated in red)
ZONE 3
(illuminated in red)
ZONE 3
(illuminated in red)
MAIN
(illuminated in red)
MAIN
(illuminated in red)
GAME Bluetooth Audio
MEDIA BOX FM TUNER
BD/DVD USB
SAT/CATV —
VIDEO Watch
AUX Listen
TV Custom Preset (SOFA MODE)
SA-CD/CD Sound Effects
OTHERS Zone Controls (FUNCTION MENU)
2CH/MULTI CUSTOM PRESET1
MOVIE CUSTOM PRESET2
MUSIC CUSTOM PRESET3
360SSM CUSTOM PRESET4
DISPLAY TEST PICTURE
AMP MENU SPEAKER SETUP
Key name Transmitting mode of the discrete
code (main)
Code name

CURSOR UP

CURSOR LEFT

CURSOR RIGHT

CURSOR DOWN
CURSOR ENTER
BACK MENU RETURN
HOME ON SCREEN ON/OFF
OPTIONS MEMORY
BLUETOOTH TX/RX STEREO/MONO

MUTING ON (MAIN)
 +
VOL +
 –
VOL –
PURE DIRECT FUNCTION + (MAIN)
CUSTOM1 FUNCTION – (MAIN)
 PRESET –
TUNING –

MUTING OFF (MAIN)
 PRESET +
TUNING +
HDMI OUT INPUT MODE
SETTINGS INPUT SETUP
TEST TEST TONE
AUTO CAL.
SPEAKERS TVAMP
(AUDIO OUTPUT)
To deactivate transmitting mode of the discrete code for the main zone
While holding down MAIN, press CUSTOM1 on the remote control for 5 seconds.
Transmitting mode of the discrete code for the main zone is deactivated when MAIN stops
flashing.
Note
• Transmitting mode of the discrete code for the main zone is cancelled automatically when you do not
press any key more than 10minutes.