Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Use this Help Guide when you have any questions on how to use the receiver.
In this Help Guide, the STR-AZ7000ES is used for illustrative purposes unless otherwise noted.
By updating your software to the latest version, you can take advantage of the newest functions.
Parts and Controls
Receiver
Front panel (with the front cover attached)
Front panel (without the front cover attached)
Indicators on the display panel
Rear panel (STR-AZ7000ES)
Rear panel (STR-AZ5000ES)
Rear panel (STR-AZ3000ES)
Remote control
Remote control
Remote control buttons that can be operated for each zone
Preparation
About input/output of video signals
Supported audio/video formats
Playable types of audio files
Digital audio formats supported by the receiver
Video formats supported by the receiver
Notes on connections
Notes on connecting cables
About HDMI connections
1. Installing speakers
Speaker installation example
Speaker configuration and speaker pattern settings
Installing 9.1.4-channel speaker system using front wide speakers (for STR-AZ7000ES)
Installing 7.1.6-channel speaker system (for STR-AZ7000ES)
Installing 5.1.5.3-channel speaker system (360RA Reference configuration) (for STR-AZ7000ES)
Installing 7.1.4-channel speaker system (for STR-AZ7000ES/STR-AZ5000ES)
Installing 7.1.2-channel speaker system with two center speakers (for STR-AZ7000ES/STR-AZ5000ES)
Installing 7.1.2-channel speaker system using front Dolby Atmos enabled speakers
Installing 7.1.2-channel speaker system
Installing 7.1-channel speaker system
Installing 5.1.4-channel speaker system using top front and top rear speakers
Installing 5.1.2-channel speaker system using top middle speakers
Installing 7.1-channel speaker system with Zone 2 connection
Installing 5.1.2-channel speaker system with bi-amplifier connection
2. Connecting speakers
How to connect speaker cables
To Next Page
Need help?
General
