Need help?Do you have a question about the Sony STR-D665 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Sensitivity | 150 mV (line) |
| Speaker load impedance | 8 ohms |
| Power Output | 100 W per channel (8 ohms, 20 Hz - 20 kHz, THD 0.09%) |
| Tuning range | FM: 87.5 MHz - 108.0 MHz, AM: 530 kHz - 1710 kHz |
| Frequency Response | 10Hz to 50kHz |
| Total Harmonic Distortion | 0.09% (8 ohms, 20 Hz - 20 kHz) |
| Output | Rec Out |
Covers fire/shock hazards, opening the unit, and FCC compliance.
Details on handling liquids, power sources, and proper placement for ventilation and safety.
Instructions on operating components, cleaning the unit, and where to seek help.
Explains the manual's layout, icons, and reference materials.
Guide for unpacking, inserting remote batteries, and battery replacement advice.
Introduces component connections and pre-connection checks.
Instructions for connecting FM/AM antennas and ground wire for optimal reception.
Guide to connecting audio sources like CD players, turntables, and tape decks.
Detailed guide for connecting front, rear, and center speakers, and woofers.
Connecting additional front speakers or TV monitor speakers.
How to select speaker configurations (A, B, A+B) using the SPEAKERS button.
Connecting video components like TVs, VCRs, and LD players for audio/video signals.
Connecting the AC cord, outlet caution, and initial system checks before use.
How to choose and operate connected audio/video sources using receiver functions.
Using controls for mute, bass, balance, tone, headphones, and watching video.
Explains remote functions, system control buttons, and TV-specific operations.
Operating multiple components simultaneously and reassigning remote function buttons.
Initial checks required before tuning radio stations.
How to tune radio stations by entering frequency or scanning.
Storing favorite stations and tuning them via preset numbers.
Step-by-step guide for recording audio to tape/MiniDisc and video to tape.
How to directly tune to pre-stored radio stations using their assigned preset numbers.
Choosing modes like DOLBY SUR, HALL, and STADIUM for different listening experiences.
Initial steps for enhancing Dolby Pro Logic sound with speaker configuration.
Choosing center channel modes and setting speaker volume levels using test tones.
Setting delay times for rear speakers to improve spatial audio perception.
Solutions for no sound, hum, unbalanced audio, radio tuning, and surround effect issues.
Troubleshooting unclear pictures, recording failures, and remote control malfunctions.
Detailed specifications for power output, distortion, and amplifier section performance.
Technical details on tuner sections, video inputs/outputs, power, dimensions, and accessories.
Definitions for Center Mode, Delay Time, Direct Tuning, Dolby Surround, and Surround Sound.
Explanations for Preset Station, Test Tone, and Dolby Pro Logic Surround concepts.
An alphabetical listing of topics and their page numbers for quick navigation.
Labeled diagram identifying all input and output terminals on the rear of the receiver.
Comprehensive explanation of each remote button's function for receiver and component control.
Concise steps for receiving broadcasts, presetting stations, and selecting components.
Quick guides for selecting sound fields and performing basic operations.
To Next Page
