Sony STR-D911 - Page 32

Specifications
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 8-ohm load, both channels driven,
from 20 - 20,000 Hz, rated 100 watts per
channel minimum RMS power, with no
more than 0.1 % total harmonic distortion
from 250 milliwatts to rated output.
(U.S. A. model only)
Von) e)itdies mectsven dela)
Continuous RMS power output (8 ohms, at 20 Hz - 20 kHz less than
0.1 % total harmonic distortion) (FRONT)
STR-D911:; 110 W + 110 W
STR-D711: 110 W + 110 W
Surround mode
Surround mode (8ohms at 1 kHz, THD 0.9 %)
STR-D711
* (only in theDOLBY SUR and THEATER modes)
32
(@} (al=sapey ol-renh ft for-h elolats)
150 W + 150 W (8 ohms)
200 W + 200 W (4 ohms)
Harmonic distortion at rated output
Less than 0.1 %
Dynamic power output
Frequency response PHONO: RIAA equalization curve
+0.5dB
CD. DAT, TAPE 1,2, VIDEO 1,2,3°:
10 Hz - SO kHz 2, dB
* STR-D911 only
Inputs
S/N (weighting
Sensitivity impedance
network, input level)
2.5 mV 74 dB
72 dB** (A, 2.5 mV)
DAT, CD
95 dB
80 dB"* (A, 250 mv)
* STR-0911 only
°° °78 IHF
Outputs
REC OUT VIDEO 1 Voltage 250 mV
(AUDIO) OUT Impedance 10 kitohms
HEADPHONES Accepts low and high impedance
headphones
MUTING -20 dB
O8FB +10 dB at 70 Hz
TONE +8 dB at 100 Hz and 10 kHz