Sony STR-DH800 User Manual (English)

Other manuals for Sony STR-DH800

Service Manual86 pages

Quick Setup Guide2 pages

Questions and Answers:

A
Angela BookerSep 10, 2025
How to fix the source sound input to the HDMI jack is not output from the Sony Receiver?
- A
  Ana PittmanSep 10, 2025
  If the source sound input to the HDMI jack is not output from the receiver or the TV speaker: - Check the HDMI connection. - You cannot listen to the Super Audio CD by connecting HDMI. - Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component. - Be sure to use a connecting cable for the HDMI jack corresponding to high speed (an HDMI version 1.3, category 2 cable) when you view images or listen to sound during a Deep Color transmission.
B
Brandon ThompsonAug 25, 2025
How to fix unbalanced left and right sounds on Sony Receiver?
- S
  Samuel RodriguezAug 26, 2025
  If the left and right sounds are unbalanced or reversed on your Sony Receiver: - Check that the speakers and components are connected correctly and securely. - Adjust the level parameters using the LEVEL menu.
S
Samantha GonzalezAug 26, 2025
How to fix no sound on my Sony STR-DH800 Receiver?
- M
  Mark CampbellAug 26, 2025
  First, check that the speakers and components are connected correctly and securely. Also, ensure that all speaker cords are correctly connected. Verify that both the receiver and all components are turned on and that the MASTER VOLUME is not set to “VOL MIN”. Make sure the SPEAKERS are not set to off and that headphones are not connected. Press MUTING on the remote to cancel the muting function. Ensure that you have selected the correct component with the input buttons. If the sound is very low, check if NIGHT MODE is activated. Finally, if the protective device on the receiver has been activated, turn off the receiver, eliminate the short-circuit problem, and turn it on again.
K
Kaitlyn RamseyAug 27, 2025
Why is there no sound from the subwoofer connected to my Sony STR-DH800 Receiver?
- L
  logananthonyAug 27, 2025
  First, check that the subwoofer is connected correctly and securely. Make sure you have turned on your subwoofer. If all speakers are set to “LARGE” and “NEO6 CIN” or “NEO6 MUS” is selected, there will be no sound from the subwoofer. Also, check the “SP PATTERN” setting.
K
Kristi MillerAug 27, 2025
How to fix unbalanced sound on my Sony STR-DH800 Receiver?
- S
  Stephen StantonAug 27, 2025
  Check that the speakers and components are connected correctly and securely. Adjust the level parameters using the LEVEL menu.
R
ryanlopezSep 6, 2025
How to fix the poor FM reception on Sony STR-DH800?
- J
  Johnny JacksonSep 6, 2025
  To improve poor FM reception on your Sony Receiver, use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna (aerial).
J
Jerry ReedSep 5, 2025
What to do if there is no sound from the S-AIR product connected to Sony Receiver?
- K
  Kenneth WyattSep 5, 2025
  If you use another S-AIR main unit, place it more than 8 m away from this S-AIR main unit. Confirm the S-AIR IDs of the S-AIR main unit and S-AIR sub unit. Confirm the pairing setting. Place the S-AIR main unit and S-AIR sub unit closer to each other. Avoid use of equipment that generates electromagnetic energy, such as a microwave oven. Place the S-AIR main unit and S-AIR sub unit separately from other wireless devices. Avoid using any other wireless devices. Change the “RF CHANGE” setting. Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit. Turn off the system and S-AIR sub unit, then turn on them. Check that headphones are not connected to the S-AIR sub unit.
P
parrisherinSep 5, 2025
Why is there severe hum or noise coming from my Sony STR-DH800?
- T
  tyrone24Sep 5, 2025
  If you're experiencing severe hum or noise from your Sony Receiver, consider the following: - Ensure that the speakers and components are securely connected. - Check that connecting cords are away from transformers, motors, TVs, or fluorescent lights (at least 3 meters away). - Move your audio components away from the TV. - Clean the plugs and jacks with a cloth slightly moistened with alcohol if they are dirty.
D
Dr. Erik RogersSep 1, 2025
What to do if no sound is heard from the S-AIR receiver of Sony Receiver?
- L
  Louis GilmoreSep 1, 2025
  If no sound is heard from the S-AIR receiver, check that the components are connected to analog jack of this receiver.
R
Rebecca SchmidtAug 30, 2025
What to do if there is no sound, or only a very low-level sound from the center/surround/surround back speakers of Sony STR-DH800?
- V
  Veronica GoodwinAug 30, 2025
  If you're experiencing no sound or very low sound from the center, surround, or surround back speakers of your Sony Receiver: - Select a CINEMA STUDIO EX mode. - Adjust the speaker level. - Check “SP PATTERN” setting.

Sony STR-DH800 Specifications

General

Equalizer	Yes
Product color	Black
Impedance	8 Ω
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	1 %
Connectivity technology	Wired
Battery type	AA
Dimensions (WxDxH)	430 x 157.5 x 322 mm
Power requirements	120V 60Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	240 W

Weight and Dimensions

Weight	8300 g

Summary

Getting Started: Speaker Setup

Installing the Speakers

Guides on how to install speakers for 5.1 and 7.1 channel systems.

Getting Started: Connecting Components

Connecting the TV

Instructions for connecting the TV via HDMI, component, or video cables.

Connecting Audio Components

Connecting Video Components

Connecting with HDMI Jacks

Connecting a DVD Player

Connecting a Blu-ray Disc Player

Connecting a Satellite Tuner/Set-Top Box

Connecting Analog Components

Initial Setup and Preparation

Connecting Antennas

Connecting the AC Power Cord

Guidance on connecting the receiver to a power outlet.

Initial Setup Operations

Performing Initial Receiver Setup

Steps to initialize the receiver and reset settings to factory defaults.

Speaker System Configuration

Selecting the Speaker System

How to select the front speaker system (A, B, or A+B) for the receiver.

Auto Calibration Function

Introduces the DCAC technology for automatic speaker calibration.

Auto Calibration Process

Preparing for Auto Calibration

Executing Auto Calibration

Starting and Cancelling Auto Calibration

Saving Auto Calibration Results

Confirming and Saving Measurement Results

Steps to confirm, save, and select calibration types after measurement.

Troubleshooting Auto Calibration

Handling Auto Calibration Errors

Explains how to interpret and resolve error codes during auto calibration.

Speaker Level and Balance Adjustment

Using Test Tone for Adjustment

Guides on adjusting speaker levels and balance using the test tone feature.

Playback Operations

Selecting a Playback Component

How to select and start playback from connected audio/video components.

Amplifier Menu Navigation

Navigating Amplifier Menus

Explains how to navigate through the receiver's menu system for adjustments.

Amplifier Menu Parameters

Menu Options Overview

Speaker Settings

Speaker Pattern and Assignment

Surround Sound and EQ Settings

Surround Sound Field Selection

Equalizer (EQ) Settings

Audio Level Adjustments

Adjusting Speaker Levels and Balance

Guides on using the LEVEL menu for test tones, phase, and individual speaker levels.

Speaker Settings and Dynamic Range

Speaker Assignments and Bass Management

Speaker Size and Bass Redirection

Speaker Distance Settings

Setting Speaker Distances

Instructions for setting distances for front, center, surround, and subwoofer speakers.

Surround Sound Settings

Distance Units and Crossover Frequencies

Sound Field and Enhanced Surround Modes

Equalizer and Tuner Settings

Equalizer (EQ) Adjustments

Tuner Configuration

HDMI Settings

HDMI Control and Subwoofer Level

Enjoying Surround Sound

Surround Sound Modes

Types of Enhanced Surround Modes

Selecting Movie/Music Sound Fields

Special Sound Modes

2CH STEREO Mode

Analog Direct Mode

Tuner Operations

Resetting Sound Fields

Listening to FM/AM Radio

Instructions for tuning into FM and AM radio broadcasts.

Tuner Tuning Methods

Automatic and Direct Tuning

Guides on automatically scanning or directly tuning to radio stations.

Tuner Presets and AM Tuning

Presetting FM/AM Radio Stations

Instructions for storing and tuning to favorite FM/AM radio stations.

Managing Radio Presets

Presetting Radio Stations

Steps to tune and store radio stations using preset numbers.

Satellite Radio Operations

Naming Preset Radio Stations

Listening to SIRIUS Satellite Radio

Introduction to SIRIUS Satellite Radio service and subscription information.

SIRIUS Satellite Radio Connectivity

Connecting the SIRIUS Satellite Radio Tuner

Instructions for connecting the SiriusConnect Home tuner to the receiver.

SIRIUS Satellite Radio Setup

Preparing SIRIUS Satellite Radio

SIRIUS Antenna Aiming

SIRIUS Satellite Radio Reception

Selecting SIRIUS Channels

Methods for selecting SIRIUS channels, including category tuning.

SIRIUS Channel Selection and Display

Direct Tuning for SIRIUS Channels

Presetting SIRIUS Channels

Presetting SIRIUS Channels Using Numbers

Steps to preset SIRIUS channels using preset numbers for quick access.

SIRIUS Parental Lock

Selecting Channels via Preset Numbers

Restricting Channel Access (Parental Lock)

Guides on setting up and using Parental Lock to restrict channel access.

Parental Lock Management

Changing the Parental Lock Code

Procedure to change the default lock code for parental controls.

Accessing and Cancelling Locked Channels

SIRIUS Satellite Radio Troubleshooting

Satellite Radio Message List

Explains common messages and their remedies for SIRIUS Satellite Radio.

“BRAVIA” Sync Features

Understanding “BRAVIA” Sync

“BRAVIA” Sync Preparation

Preparing for BRAVIA Sync with Compatible TVs

Preparing BRAVIA Sync with Non-Compatible TVs

“BRAVIA” Sync Simple Operations

One-Touch Play for Discs

Enjoying discs via HDMI with automatic input switching and power control.

Simple Disc Playback via TV Menu

System Audio and Power Control

System Audio Control for TV Sound

Routing TV audio through receiver speakers and adjusting volume.

System Power Off Function

Automatically turns off receiver and components when the TV is turned off.

S-AIR Operations

About S-AIR Products

Introduction to S-AIR products, including main and sub units for wireless audio.

Setting Up S-AIR Products

Inserting the Wireless Transmitter

Instructions for inserting the wireless transmitter into the S-AIR main unit.

Establishing S-AIR Sound Transmission

Setting S-AIR Main Unit ID

Steps to set the ID for the S-AIR main unit to establish sound transmission.

Setting S-AIR Sub Unit ID

Guides on setting the ID for S-AIR sub units (surround amplifier, receiver).

S-AIR Pairing Operation

Understanding S-AIR Sound Transmission

Pairing S-AIR Units

Steps to pair the S-AIR main unit with a specific sub unit for secure transmission.

Completing S-AIR Pairing

Performing S-AIR Pairing

Final steps to complete S-AIR pairing and exit menus.

Cancelling S-AIR Pairing

Enjoying S-AIR in Other Rooms

Using the S-AIR Receiver for Remote Sound

How to enjoy system sound in another room using the S-AIR receiver.

Optimizing S-AIR Transmission

Changing Channel for Better Sound

Adjusting 'RF CHANGE' setting to improve transmission stability with other wireless systems.

S-AIR Standby Operation

Enjoying S-AIR in Standby Mode

Enables S-AIR receiver operation while the main unit is in standby mode.

Other Operations: Audio Input Mode

Switching Digital and Analog Audio Input

How to select between digital and analog audio input modes.

Reassigning Input Signals

Assigning Sound/Images to Other Inputs

Procedure to reassign audio/video signals to different input jacks.

Digital Media Port (DMPORT) Usage

Enjoying Sound via DMPORT

How to connect a digital media port adapter to enjoy sound from portable devices.

Connecting and Detaching DMPORT Adapter

Connecting the DMPORT Adapter

Instructions for connecting the DIGITAL MEDIA PORT adapter to the DMPORT jack.

Detaching the DMPORT Adapter

DMPORT Listening and Display Options

Listening/Watching via DMPORT

How to play back and listen to components connected via DMPORT.

Changing Display Information

Receiver Operational Features

Using the Sleep Timer

Recording Audio/Video Sources

Recording and Bi-Amplifier Connection

Recording onto Media

Using a Bi-Amplifier Connection

Speaker Setup and Bi-Amp Configuration

Setting Up Speakers for Bi-Amp

Configuring speaker patterns and assigning surround back speakers for bi-amplification.

Using the Remote Commander

Operating Connected Components

How to operate Sony or non-Sony components using the supplied remote.

Remote Control Programming

Programming the Remote for Components

Steps to program the remote to control non-Sony components and TVs.

Cancelling and Activating Remote Programming

Remote Programming Troubleshooting and Codes

Troubleshooting Programming and Clearing Memory

Component Control Code Tables

Receiver Precautions

Safety Precautions

Important safety guidelines regarding liquid, heat, and power.

Power Source Precautions

Notes on AC power cord usage, voltage, and proper plug insertion.

Heat Buildup Information

Receiver Placement and Operation

Optimal Placement Guidelines

Recommendations for placing the receiver to prevent heat buildup and interference.

Operation and Cleaning Procedures

About the S-AIR Function

Troubleshooting Audio Issues

No Sound or Low Volume

Steps to resolve issues with no sound or low volume from any component.

Component-Specific Sound Issues

Channel Imbalance or Reversal

Troubleshooting More Audio and Recording Issues

Noise, Hum, and Surround Effect Issues

Multi-Channel Sound and Recording Problems

DMPORT Component Sound Issues

Troubleshooting Video and Tuner Issues

Picture and Recording Problems

FM Reception and Tuning Problems

Troubleshooting poor FM reception and inability to tune radio stations.

Troubleshooting HDMI and System Audio

HDMI Audio/Video Output Issues

Resolving problems with HDMI audio/video not outputting correctly.

HDMI Control and System Audio Control Issues

Troubleshooting HDMI control function and System Audio Control sound output.

Troubleshooting S-AIR Connectivity

S-AIR Connection Issues

S-AIR Sound and Noise Problems

Troubleshooting Remote and System Issues

Remote Control Malfunctions

Error Messages and Protector Mode

Receiver Specifications

Audio Power Specifications

Input/Output and Tuner Specifications

General Specifications and Accessories

General Power and Dimension Specs

Related product manuals

STR-DH810 - Audio Video Receiver