Need help?Do you have a question about the Sony STR-DH790 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Output impedance | 6 - 16 Ω |
| Pre-out channels | 2 SW |
| Audio output channels | 7.2 channels |
| Total Harmonic Distortion (THD) | 0.9 % |
| Power output per channel (1KHz@6 Ohm) | 145 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| AirPlay | No |
| Display | - |
| HDCP version | 2.2 |
| Audio decoders | DSD, DTS, DTS 96/24, DTS-ES, DTS-HD HR, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital, Dolby Dual Mono |
| Volume control | Rotary |
| Audio Return Channel (ARC) | Yes |
| Consumer Electronics Control (CEC) | BRAVIA Sync |
| FM antenna ports quantity | 1 |
| Speakers connectivity type | Clamp terminals |
| Supported radio bands | FM |
| Preset stations quantity | 30 |
| Audio (L/R) in | 4 |
| Multichannel audio input type | RCA |
| Audio (L/R) out | 7 |
| Headphone connectivity | 6.3 mm |
| Multichannel audio output type | Terminals |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
Weight and Dimensions| Depth | 297 mm |
|---|---|
| Width | 430 mm |
| Height | 133 mm |
| Weight | 7400 g |
Identifies and explains controls on the front panel of the AV receiver.
Explains the various indicators shown on the receiver's display panel.
Details the input/output jacks and ports located on the rear of the receiver.
Describes the functions and buttons of the included remote control.
Guide on choosing speaker configurations and placement for optimal audio.
Instructions for connecting speaker cables and setting up speaker systems.
Step-by-step guide for connecting the receiver to a television via HDMI.
How to connect external audio and video sources using HDMI and analog connections.
Instructions for connecting the FM antenna for radio reception.
Guide to initial setup including language selection and auto calibration.
Configuration of HDMI settings, including eARC/ARC and signal format.
How to play audio and video content from connected devices.
Instructions for streaming audio wirelessly from Bluetooth-enabled devices.
How to choose and apply different sound field settings for an enhanced audio experience.
Navigating the receiver's menu system using the TV display for operation.
Configuring speaker layout and type to match the installed system.
Selecting which set of front speakers to use when multiple systems are connected.
Procedure to reset all receiver settings to their original factory defaults.
Solutions for problems like no sound, receiver turning off, or display issues.
Specific steps to resolve issues with sound output levels or noise.
Guidance for problems related to image display, such as no image or HDR issues.
Steps to fix issues with pairing, connection, sound, or interference.
Technical details including power output, frequency response, and connectivity standards.
Lists the digital audio formats supported by the receiver and their connections.
To Next Page
