Sony STR-DA3000ES Operating Instructions (STRDA3000ES) Specifications

Specifications
Amplifier Section
• 7 Channel Power Rating:
150 Watts Per Channel X 7
(8 ohms, 20 Hz - 20 kHz, THD
.6%)
• Stereo Power Rating:
150 Watts Per Channel X 2
(8 ohms 20 Hz-20 kHz, THD
.6%)
• Input Sensitivity/Impedance:
Phono: 2.5 mV/50 kOhm
Line Inputs/Multi-Channel
Inputs 1&2: 150 mV/50 kOhm
• Frequency Response:
10 Hz - 50 kHz +0.5/-2 dB
(w/Soundfield and EQ Bypassed)
• Rec Out Level/Impedance:
150 mV/10 kOhm
• Pre Out Level/Impedance:
Front: 2V /1 kOhm
Center: 2V/1 kOhm
Surround: 2V/1 kOhm
Subwoofer: 2V/1 kOhm
Surround Back: 2V/1 kOhm
Video Section
• Input Sensitivity/Impedance:
Composite In: 1 Vp-p/75 Ohms
S-VideoIn (Y): 1 Vp-p/75 Ohms
S-Video In (C):
0.286 Vp-p/75 Ohms
Component Video In (Y):
1 Vp-p/75 Ohms
Component Video In (Pb B-Y):
0.7 Vp-p/75 Ohms
Component Video In (Pr R-Y):
0.7 Vp-p/75 Ohms
• Output Sensitivity/Impedance:
Composite Video Out:
1 Vp-p/75 Ohms
S-Video Out (Y):1 Vp-p/75 Ohms
S-Video Out (C):
0.286 Vp-p/75 Ohms
Component Video Out (Y):
1 Vp-p/75 Ohms
Component Video Out (Pb B-Y):
0.7 Vp-p/75 Ohms
Component Video Out (Pr R-Y):
0.7 Vp-p/75 Ohms
General
• Power Requirements:
AC120V, 60 Hz
• Power Consumption:
(Standby): 1W
(When POWER SAVE is Set)
(In Operation): 280W
Accessories
Supplied Accessories
• Instruction Manual
• FM Wire Antenna
• AM Loop Antenna
• RM-LG112 LCD Remote
Commander®Remote Control
• RM-US106 2nd Remote
Control (for Multi-Zone)
• Size AA Batteries: 2
• Audio/Video Control S Cord
• Monaural Mini-Plug Cord
Weights & Measures
• Approx. Dimensions (w/h/d):
16.92" x 6.89" x 16.93"
(430 x 175 x 430mm)
(16.93" (470mm) Deep
Including Terminals)
• Approx. Weight:
28.66 lbs. (13.0 kg)
Key Technology
Specifications
©2003 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony, Digital Cinema Sound logo, i.LINK and Remote Commander are
trademarks of Sony. Dolby, Dolby Digital, and Pro Logic are registered trademarks of Dolby Laboratories Licensing Corporation. dts, dts ES and dts:NEO6 are trademarks of Digital Theater Systems,
Inc. All other trademarks and logos are property of their respective owners.
STR-DA3000ES
ES Receiver

Sony STR-DA3000ES Operating Instructions (STRDA3000ES) Specifications

Amplifier Section

7 Channel Power Rating	150 Watts Per Channel X 7
Stereo Power Rating	150 Watts Per Channel X 2
Input Sensitivity/Impedance (Phono)	2.5 mV/50 kOhm
Input Sensitivity/Impedance (Line Inputs/Multi-Channel Inputs 1&2)	150 mV/50 kOhm
Frequency Response	10 Hz - 50 kHz +0.5/-2 dB
Rec Out Level/Impedance	150 mV/10 kOhm
Pre Out Level/Impedance (Front)	2V /1 kOhm
Pre Out Level/Impedance (Center)	2V/1 kOhm
Pre Out Level/Impedance (Surround)	2V/1 kOhm
Pre Out Level/Impedance (Subwoofer)	2V/1 kOhm
Pre Out Level/Impedance (Surround Back)	2V/1 kOhm

Video Section

Input Sensitivity/Impedance (Composite In)	1 Vp-p/75 Ohms
Input Sensitivity/Impedance (S-Video In Y)	1 Vp-p/75 Ohms
Input Sensitivity/Impedance (S-Video In C)	0.286 Vp-p/75 Ohms
Input Sensitivity/Impedance (Component Video In Y)	1 Vp-p/75 Ohms
Input Sensitivity/Impedance (Component Video In Pb B-Y)	0.7 Vp-p/75 Ohms
Input Sensitivity/Impedance (Component Video In Pr R-Y)	0.7 Vp-p/75 Ohms
Output Sensitivity/Impedance (Composite Video Out)	1 Vp-p/75 Ohms
Output Sensitivity/Impedance (S-Video Out Y)	1 Vp-p/75 Ohms
Output Sensitivity/Impedance (S-Video Out C)	0.286 Vp-p/75 Ohms
Output Sensitivity/Impedance (Component Video Out Y)	1 Vp-p/75 Ohms
Output Sensitivity/Impedance (Component Video Out Pb B-Y)	0.7 Vp-p/75 Ohms
Output Sensitivity/Impedance (Component Video Out Pr R-Y)	0.7 Vp-p/75 Ohms

Weights & Measures

Dimensions (w/h/d)	16.92" x 6.89" x 16.93" (430 x 175 x 430mm)
Depth Including Terminals	16.93" (470mm)
Weight	28.66 lbs. (13.0 kg)

Power

Power Requirements	AC120V, 60 Hz
Power Consumption (Standby)	1W
Power Consumption (In Operation)	280W