To Next PageTo Next Page
Need help?Do you have a question about the Sony STR-DA3000ES Operating Instructions (STRDA3000ES) and is the answer not in the manual?
Amplifier Section| 7 Channel Power Rating | 150 Watts Per Channel X 7 |
|---|---|
| Stereo Power Rating | 150 Watts Per Channel X 2 |
| Input Sensitivity/Impedance (Phono) | 2.5 mV/50 kOhm |
| Input Sensitivity/Impedance (Line Inputs/Multi-Channel Inputs 1&2) | 150 mV/50 kOhm |
| Frequency Response | 10 Hz - 50 kHz +0.5/-2 dB |
| Rec Out Level/Impedance | 150 mV/10 kOhm |
| Pre Out Level/Impedance (Front) | 2V /1 kOhm |
| Pre Out Level/Impedance (Center) | 2V/1 kOhm |
| Pre Out Level/Impedance (Surround) | 2V/1 kOhm |
| Pre Out Level/Impedance (Subwoofer) | 2V/1 kOhm |
| Pre Out Level/Impedance (Surround Back) | 2V/1 kOhm |
Video Section| Input Sensitivity/Impedance (Composite In) | 1 Vp-p/75 Ohms |
|---|---|
| Input Sensitivity/Impedance (S-Video In Y) | 1 Vp-p/75 Ohms |
| Input Sensitivity/Impedance (S-Video In C) | 0.286 Vp-p/75 Ohms |
| Input Sensitivity/Impedance (Component Video In Y) | 1 Vp-p/75 Ohms |
| Input Sensitivity/Impedance (Component Video In Pb B-Y) | 0.7 Vp-p/75 Ohms |
| Input Sensitivity/Impedance (Component Video In Pr R-Y) | 0.7 Vp-p/75 Ohms |
| Output Sensitivity/Impedance (Composite Video Out) | 1 Vp-p/75 Ohms |
| Output Sensitivity/Impedance (S-Video Out Y) | 1 Vp-p/75 Ohms |
| Output Sensitivity/Impedance (S-Video Out C) | 0.286 Vp-p/75 Ohms |
| Output Sensitivity/Impedance (Component Video Out Y) | 1 Vp-p/75 Ohms |
| Output Sensitivity/Impedance (Component Video Out Pb B-Y) | 0.7 Vp-p/75 Ohms |
| Output Sensitivity/Impedance (Component Video Out Pr R-Y) | 0.7 Vp-p/75 Ohms |
Weights & Measures| Dimensions (w/h/d) | 16.92" x 6.89" x 16.93" (430 x 175 x 430mm) |
|---|---|
| Depth Including Terminals | 16.93" (470mm) |
| Weight | 28.66 lbs. (13.0 kg) |
Power| Power Requirements | AC120V, 60 Hz |
|---|---|
| Power Consumption (Standby) | 1W |
| Power Consumption (In Operation) | 280W |
Precautions against fire, shock, and guidelines for battery disposal.
Information on FCC rules for Class B devices and measures to correct interference.
Illustrates connecting audio jacks for DVD players, TV monitors, and satellite tuners to the receiver.
Shows how to connect video jacks (Component, S-Video, Standard Video) for various devices.
Illustrates connecting digital audio jacks for CD/SACD players and MD/DAT decks.
Explains connecting multi-channel outputs for DVD/SACD players or external decoders.
Shows how to connect component video jacks for DVD players and TVs for higher quality video.
Illustrates connecting analog audio jacks for turntables, CD/SACD players, and tape decks.
Instructions for connecting the supplied AM loop and FM wire antennas.
Explains 7.1/6.1 channel system configurations and speaker requirements.
Details speaker cord connections to receiver terminals (FRONT, SURROUND, CENTER, etc.).
Instructions for connecting the AC power cord to the receiver and wall outlet.
Step-by-step guide to initialize the receiver and reset factory defaults.
How to use the SPEAKER SET UP menu for speaker size and distance configuration.
Settings for sub woofer presence and bass redirection circuitry activation.
Settings for front speaker size (LARGE/SMALL) and bass redirection.
How to set the distance for front speakers and placement considerations.
Details initial settings and options for SP EASY SET UP and SPEAKER PATTERN.
Settings for center speaker size and bass redirection logic.
How to set the distance for the center speaker.
Settings for surround speaker size and bass redirection.
How to set the distance for surround speakers.
Settings for surround back speakers (DUAL, SINGLE, YES, NO).
How to set the distance for surround back speakers.
How to set the distance for the sub woofer.
How to use the test tone feature to adjust speaker levels and balance.
How to adjust speaker levels and balance using the LEVEL menu.
How to select audio inputs using the INPUT SELECTOR dial.
Using the MULTI CH IN function for high-quality analog inputs like DVD or SACD.
How to tune radio stations by directly entering the frequency using the remote.
How to automatically store FM/RDS stations alphabetically without redundancy.
How to preset up to 30 FM or AM stations manually for easy tuning.
Instructions for tuning FM/AM broadcasts using the built-in tuner.
Specifies decoding types (Pro Logic II, DTS Neo:6) for 2 channel sources.
How to select pre-programmed sound fields to enhance the listening experience.
Allows selection of desired decoding mode for audio sources for optimal quality.
How to select movie-specific sound fields for cinematic audio.
Receiver automatically detects and decodes input audio signals without adding effects.
How to select music-specific sound fields like Concert Hall or Jazz Club.
Allows selection of decoding mode for surround back signals from multi channel streams.
How to select surround back modes (AUTO, MATRIX, OFF) based on input stream.
How to assign digital audio inputs (Coaxial, Optical) to different receiver inputs.
How to switch audio input modes (AUTO 2CH, COAXIAL FIXED, etc.) for components with digital inputs.
How to adjust balance and level for each speaker using the LEVEL menu.
How to adjust tonal quality (bass, treble, midrange) for each speaker using the EQUALIZER menu.
Specific steps and options for assigning digital audio inputs.
Details of parameters like TEST TONE, speaker levels, sub woofer levels, and multi channel sub woofer levels.
Parameters for EQ PRESET selection, bass, treble, and midrange levels for speakers.
Advanced parameters for SPEAKER SET UP when MENU EXPAND is enabled.
Advanced parameters for SURR SET UP when MENU EXPAND is enabled.
Advanced parameters for the LEVEL menu when MENU EXPAND is enabled.
How to adjust surround effects and parameters using the SURR SET UP and LEVEL menus.
Comprehensive list of all parameters available in the SPEAKER SET UP menu.
Comprehensive list of parameters in the SURR SET UP menu.
Comprehensive list of parameters in the LEVEL menu, including PHASE NOISE and D.RANGE COMP.
How to customize surround effects for selected sound fields.
How to use the CUSTOMIZE menu for various receiver adjustments.
Specifying surround speaker location (SIDE/HIGH, BEHD/LOW, etc.) for optimal Cinema Studio EX modes.
Compressing dynamic range for low-volume movie viewing, especially with Dolby Digital.
Comprehensive precautions covering safety, power sources, heat, placement, operation, and cleaning.
Guide to resolving common operational difficulties with the receiver.
Troubleshooting remote control malfunctions and understanding error codes.
Detailed specifications for audio power output and total harmonic distortion for U area models.
Power ratings and THD for STR-DA5000ES with 8-ohm loads.
Power ratings and THD for STR-DA3000ES with 8-ohm loads.
Power output details for different area codes and impedance loads for amplifier section.
