Sony STR-DA3000ES Operating Instructions (STRDA3000ES) - Specifications; Supplied Accessories List; Power Consumption Details; AC Outlet Specifications

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY STR-
DA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.fm]
62
GB
model name1[STR-DA5000ES]
[4-247-188-13(4)]
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:Y: 1 Vp-p, 75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p, 75
ohms
P
R
/C
R
/R-Y: 0.7 Vp-p, 75
ohms
80 MHz HD Pass Through
General
Power requirements
Power consumption
STR-DA5000ES:
STR-DA3000ES:
Power consumption (during standby mode)
1 W
AC outlets
Dimensions 430 × 175 × 470 mm
including projecting parts and
controls
Mass (Approx.) 13 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
AC power cord (1)
STR-DA5000ES:
Remote commander RM-LJ312 (1)
R6 (size-AA) batteries (3)
STR-DA3000ES:
Remote commander RM-LG112 (1)
R6 (size-AA) batteries (2)
Models of area code U, CA:
Remote commander RM-US106 (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
Area code Power requirements
U, CA 120 V AC, 60 Hz
CEL 230 V AC, 50/60 Hz
TW 110 V AC, 60 Hz
CN 220-230 V AC, 50/60 Hz
KR 220 V AC, 60 Hz
Area code Power consumption
U, CEL, TW, CN 300 W
CA 500 VA
Area code Power consumption
U, CEL, TW, CN, KR 280 W
CA 470 VA
Area code AC outlets
U, CA 2 switched, 120 W/1A MAX
CEL 1 switched, 100 W MAX
CN, KR, TW – (no AC outlet)
For details on the area code of the component you
are using, see page 3.