EasyManuals Logo

Sony STR-DA3000ES Operating Instructions (STRDA3000ES) User Manual

Sony STR-DA3000ES Operating Instructions (STRDA3000ES)
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY STR-
DA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB02REG_STR-DA5000ES-U.fm]
2
GB
model name1[STR-DA5000ES]
[4-247-188-13(4)]
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To prevent fire, do not cover the ventilation of the
apparatus with news papers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Don’t throw away batteries with
general house waste; dispose of
them correctly as chemical waste.
For customers in the United States
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
You are cautioned that any changes or modification not
expressly approved in this manual could void your
authority to operate this equipment.
Note to CATV system installer:
This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
WARNING
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.

Table of Contents

Other manuals for Sony STR-DA3000ES Operating Instructions (STRDA3000ES)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony STR-DA3000ES Operating Instructions (STRDA3000ES) and is the answer not in the manual?

Sony STR-DA3000ES Operating Instructions (STRDA3000ES) Specifications

Amplifier Section IconAmplifier Section
7 Channel Power Rating150 Watts Per Channel X 7
Stereo Power Rating150 Watts Per Channel X 2
Input Sensitivity/Impedance (Phono)2.5 mV/50 kOhm
Input Sensitivity/Impedance (Line Inputs/Multi-Channel Inputs 1&2)150 mV/50 kOhm
Frequency Response10 Hz - 50 kHz +0.5/-2 dB
Rec Out Level/Impedance150 mV/10 kOhm
Pre Out Level/Impedance (Front)2V /1 kOhm
Pre Out Level/Impedance (Center)2V/1 kOhm
Pre Out Level/Impedance (Surround)2V/1 kOhm
Pre Out Level/Impedance (Subwoofer)2V/1 kOhm
Pre Out Level/Impedance (Surround Back)2V/1 kOhm
Video Section IconVideo Section
Input Sensitivity/Impedance (Composite In)1 Vp-p/75 Ohms
Input Sensitivity/Impedance (S-Video In Y)1 Vp-p/75 Ohms
Input Sensitivity/Impedance (S-Video In C)0.286 Vp-p/75 Ohms
Input Sensitivity/Impedance (Component Video In Y)1 Vp-p/75 Ohms
Input Sensitivity/Impedance (Component Video In Pb B-Y)0.7 Vp-p/75 Ohms
Input Sensitivity/Impedance (Component Video In Pr R-Y)0.7 Vp-p/75 Ohms
Output Sensitivity/Impedance (Composite Video Out)1 Vp-p/75 Ohms
Output Sensitivity/Impedance (S-Video Out Y)1 Vp-p/75 Ohms
Output Sensitivity/Impedance (S-Video Out C)0.286 Vp-p/75 Ohms
Output Sensitivity/Impedance (Component Video Out Y)1 Vp-p/75 Ohms
Output Sensitivity/Impedance (Component Video Out Pb B-Y)0.7 Vp-p/75 Ohms
Output Sensitivity/Impedance (Component Video Out Pr R-Y)0.7 Vp-p/75 Ohms
Weights & Measures IconWeights & Measures
Dimensions (w/h/d)16.92" x 6.89" x 16.93" (430 x 175 x 430mm)
Depth Including Terminals16.93" (470mm)
Weight28.66 lbs. (13.0 kg)
Power IconPower
Power RequirementsAC120V, 60 Hz
Power Consumption (Standby)1W
Power Consumption (In Operation)280W

Related product manuals