Getting Started
masterpage:Right
lename[E:\SEM_Janet\Data_DB895D\J9050665_2598514111DB895DCEL\2598514111\GB03
ON_STR-DB895D-CEL.fm]
23
GB
model name1[STR-DB895D]
[2-598-514-11(1)]
To output the test tone only from
a specific speaker
Set “T. TONE” in the LEVEL menu to “FIX”
(page 42). The test tone is output only from the
selected speaker.
For more precise adjustment
You can output the test tone or sound source
from two adjacent speakers to adjust their
balance and level.
Set “MENU XXX” in the CUSTOMIZE menu
to “MENU EXP.” (page 44). Then select the two
speakers you want to adjust using “P. NOISE”
or “P. AUDIO” in the LEVEL menu (page 46).
Notes
• The test tone cannot be used when the ANALOG
DIRECT or MULTI CH IN function is used.
• Although these adjustments can also be made via the
front panel using the LEVEL menu (when the test
tone is output, the receiver switches to the LEVEL
menu automatically), we recommend you follow the
procedure described above and adjust the speaker
levels from your listening position using the remote.
GB01COV_STR-DB895D-CEL.book Page 23 Wednesday, June 15, 2005 9:28 AM
To Next Page
Loading...
Need help?
General