masterpage:Left
lename[E:\SEM_Janet\Data_DB895D\J9050665_2598514111DB895DCEL\2598514111\GB03
ON_STR-DB895D-CEL.fm]
18
GB
model name1[STR-DB895D]
[2-598-514-11(1)]
Connecting the AC power
cord
Connect the supplied AC power cord to the AC
IN terminal on the receiver, then connect the AC
power cord to a wall outlet.
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
1 Press ?/1 to turn off the receiver.
2 Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears in the
display alternatingly.
3 Press MEMORY/ENTER.
“CLEARING” appears in the display for a
while, then “CLEARED” appears.
The following are reset to their factory
settings.
• All settings in the SPEAKER SETUP,
LEVEL, EQUALIZER, CUSTOMIZE
and TUNER menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
stations.
• All input mode memorized for each
input.
• MASTER VOLUME –/+ is set to
“–oodB” (volume minimum).
• INPUT SELECTOR is set to “DVD”.
4: Connecting the AC
power cord
AC power cord
~ AC IN
IMPEDANCE SELECTOR
4
8
AC IN terminal
GB01COV_STR-DB895D-CEL.book Page 18 Wednesday, June 15, 2005 9:28 AM
To Next Page
Loading...
Need help?
General