EasyManua.ls Logo

Sony STR-DB895D - Page 65

Sony STR-DB895D
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Additional Information
masterpage:Right
lename[E:\SEM_Janet\Data_DB895D\J9050665_2598514111DB895DCEL\2598514111\GB09
A
DD_STR-DB895D-CEL.fm]
65
GB
model name1[STR-DB895D]
[2-598-514-11(1)]
DAB tuner section
Frequency range
Band-III: 174.928 (5A) –
239.200 (13F) MHz
L-Band: 1452.960 (LA) –
1490.624 (LW) MHz
For details, see “DAB
frequency table” on
page 66.
Antenna DAB wire antenna
Antenna terminals 75 ohms, unbalanced
Sensitivity –99 dBm
Signal-to-noise ratio 97 dB
THD+N 0.009% (1 kHz)
Channel separation 87 dB (1 kHz)
Selectivity 40 dB (at adjacent channel)
Frequency response +0.5/–0.5 dB
(5 Hz – 20 kHz)
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
Sensitivity
Mono: 18.3 dBf, 2.2 µV/75 ohms
Stereo: 38.3 dBf, 22.5 µV/75 ohms
Useable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range
With 9-kHz tuning scale 531 – 1,602 kHz
Antenna Loop antenna
Intermediate frequency 450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5% (50 mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms
P
B/CB/B-Y: 0.7 Vp-p,
75 ohms
P
R/CR/R-Y: 0.7 Vp-p,
75 ohms
80 MHz HD Pass Through
General
Power requirements
Power consumption
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
397 × 160.5 × 430 mm
including projecting parts
and controls
Mass (Approx.) 13.5 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
DAB wire antenna (1)
Remote commander RM-AAP002 (1)
R6 (size-AA) batteries (2)
AC power cord (1)
Design and specifications are subject to change
without notice.
Area code Power requirements
CEL, CEK 230 V AC, 50/60 Hz
Area code Power consumption
CEL, CEK 290 W
For details on the area code of the component you
are using, see page 2.
continued
GB01COV_STR-DB895D-CEL.book Page 65 Wednesday, June 15, 2005 9:28 AM

Table of Contents

Other manuals for Sony STR-DB895D

Related product manuals