Sony STR-DH590 Help Guide

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
No image and/or sound is output from the TV when the receiver is in the standby
mode.
When the receiver enters the standby mode, image and/or sound from the HDMI device selected right before the
receiver entered the standby mode is output to the TV. If no image and/or sound is output, perform the following
operations:
Turn on the receiver, and then select the input to which the playback device is connected.
Press AMP MENU, then set “<HDMI>” - “CTRL.HDMI” to “CTRL ON,” and then set “<HDMI>” - “STBY.THRU” to
“AUTO” or “ON” on the display panel.
If a device that supports the Control for HDMI function but is not manufactured by Sony is connected, press AMP
MENU and set “<HDMI>” - “CTRL.HDMI” to “CTRL ON” on the display panel.
4-731-210-11(1) Copyright 2018 Sony Corporation
104

Sony STR-DH590 Specifications

General

Receiver type	Surround
Output impedance	6 - 16 Ω
Audio output channels	5.2 channels
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	4
Digital audio optical in	1
Headphone connectivity	6.3 mm
Speakers connectivity type	-
Bluetooth	Yes
Ethernet LAN	No
Supported radio bands	FM
Preset stations quantity	30
HDCP version	2.2
Product color	Black
Audio decoders	DSD, DTS 96/24, DTS-HD HR, DTS-HD Master Audio, Dolby Digital, Dolby Dual Mono
Consumer Electronics Control (CEC)	BRAVIA Sync
AC input voltage	120 V
AC input frequency	60 Hz

Weight and Dimensions

Depth	297 mm
Width	430 mm
Height	133 mm
Weight	7100 g