Need help?Do you have a question about the Sony TA-3200F and is the answer not in the manual?
General| Total harmonic distortion | 0.1% |
|---|---|
| Damping factor | 50 |
| Speaker load impedance | 4 ohms to 16 ohms |
| Semiconductors | transistors |
| Type | Stereo amplifier |
| Signal to noise ratio | 80dB |
Overview of the audio circuit, including low filter, preamplifier, and protection.
Visual representation of the amplifier's functional blocks and signal flow.
Details the circuit designed to protect speakers from DC or low-frequency faults.
Explains the circuits that protect power transistors from overload conditions.
Describes the circuit that limits output power to prevent distortion or damage.
Step-by-step guide for removing the front panel of the unit.
Instructions for detaching the front subchassis assembly.
Procedure for replacing controls and switches located on the front.
Steps for removing the rear panel.
Detailed guide for replacing the unit's power transistors.
Method for replacing components attached with rivets on the rear panel.
Diagram showing the internal layout of major components.
Procedure for setting the DC bias for optimal performance and stability.
Steps to adjust DC balance for minimizing distortion.
Layout diagram of the power supply board components.
Wiring schematic for the front panel controls and indicators.
To Next Page
