Sony TA-F235R - Service Manual

TA-F239R
SERVICE MANUAL AEP Model
UK Model
E Model
Australian Model
SPECIFICATIONS
Amplifier Harmonic distortion Less than 0.008% at 10 W output
Continuous RMS power output (both channels driven Intermodulation (IM) distortion (60 Hz: 7 kHz = 4: 1)
simultaneously) Less than 0.008% at 10 W output
Except for Germany Frequency response PHONO: RIAA equalization curve
+0.5 DB
DIN, 1 kHz 40 W + 40 W TUNER, CD, DAT/TAPE 1, TAPE 2:
20 Hz — 20 kHz (0.03%) 30 W +30 W 7 Hz — 100 kHz *$dB
Residual noise Less than 170 wV (network A)
Germany Damping factor 50 (8 ohms, 1 kHz)
DIN, 1 kHz 40 W +40 W exces
20 Hz ~ 20 kHz (0.05%) 30 W + 30 W System Preamplifier: Low-noise, equalizer
amplifier
Input Power amplifier: Pure-complementary
SEPP OCL power amlifier with all
Input jack Jack type stages directry coupled
PHONO (MM) 50 kilohms Power requirements Model for UK, Australian:
240 V AC, 50/60 Hz
Models for European countries:
220 V — 230 V AC, 50/60 Hz
TUNER, CD,
DAT/TAPE 1
TAPE 2
The above values are measured at 230 V AC. (AEP model)
PHONO (MM) Power Consumption Model for Scandinavian countries,
Model for other countries
Sony SUM-3 (NS) batteries (2)
HEADPHONES | Stereo Accepts low and high
phono jack | impedance headphones
Design and specifications are subject to change without
Switzerland, Spain and Portugal
TUNER, CD, 100 dB
DAT/TAPE 1
TAPE 2
100 W
Tone controls notice.
Models for other coutries: 120 V
100 W
Output Dimension Approx. 430 x 115 X 310 mm (w/h/d)
Turnover frequency
150mV =| 50 kilohms
220 V or 240 V AC adjustble, 50/
Model for other European countries
; ; 17 X 4'/2 X 12 '/s inches
Output jack Jacktype | Voltage/impedance Weight beso kg ds ib 4 bs
BASS + 10 dB (100 Hz)
O N Y.
S/N 60 Hz
100 W
REC OUT Phono jack ae 450 mV impedance Supplied accessories Remote commander RM-S312 (1)
TREBLE + 10 dB (10 kHz)

Sony TA-F235R Specifications