Sony TA-FE310R Service Manual

TA-FE310R/FE510R
AEP Model
TA-FE310R/FE510R
UK Model
TA-FE310R
SERVICE MANUAL
INTEGRATED STEREO AMPLIFIER
MICROFILM
SPECIFICATIONS
Photo : TA-FE510R
Amplifier section
DIN power output
TA-FE510R: 80 W+80 W (4 ohms at 1 kHz)
60 W+60 W (8 ohms at 1 kHz)
TA-FE310R: 55 W+55 W (4 ohms at 1 kHz)
45 W+45 W (8 ohms at 1 kHz)
Frequency response
PHONO (20 Hz-20 kHz): RIAA equalization curve
±0.5 dB
TUNER, CD, AUX, TAPE1/DAT,
TAPE2/MD: 7 Hz-70 kHz dB
S/N (network A)
PHONO: 80dB
TUNER, CD, AUX, TAPE1/DAT,
TAPE2/MD: 105 dB
Output voltage/ impedance
REC OUT: 200 mV, 1 kilohm
PHONES: 5 mW (at 8 ohms)
Speakers impedance:
4-16 ohms, 8-16 ohms (SPEAKERS A+B)
Damping factor
80 (8 ohms, 1 kHz)
General
System
Power amplifier: Pure-complementary SEPP OCL
power amplifier with all stages directly coupled
Preamplifier. Low-noise, equalizer amplifier
Power requirements
Models not supplied with a voltage selector:
220-230 V AC, 50/60 Hz
Power consumption
TA-FE510R: 160 W
TA-FE310R: 120 W
Dimensions (approx.) (w/h/d):
430×105×300 mm
incl. projecting parts and controls
Mass (approx.)
TA-FE510R: 4.8 kg
TA-FE310R: 4.3 kg
Supplied accessories
Remote commander (remote) (1)
RM-S315
Sony batteries SUM-3 (NS) (2)
Design and specifications are subject to change without
notice.

Sony TA-FE310R Specifications

General

Power Output	40W (8 ohms, 20Hz-20kHz, 0.08% THD)
Frequency Response	7Hz to 100kHz
Total Harmonic Distortion (THD)	0.03%
Input Sensitivity	2mV (MM), 150mV (line)
Signal-to-Noise Ratio	100 dB
Dimensions	430 x 135 x 310mm
Weight	6.7kg
Total harmonic distortion	0.08%
Signal to noise ratio	76dB (MM), 100dB (line)
Speaker load impedance	4-16 ohms

Summary

Specifications

Amplifier Section Specifications

Details power output, frequency response, and impedance for the amplifier section.

General Specifications

Covers system type, power requirements, consumption, dimensions, mass, and accessories.

SECTION 1 GENERAL

1-1. Index to Parts and Controls

Lists and illustrates front and rear panel controls and their functions for easy identification.

SECTION 2 DIAGRAMS

2-1. Circuit Boards Location

Identifies the physical location of various circuit boards within the unit for service.

2-2. IC Pin Function Description

Provides a detailed pinout and function for the main control IC (TMP47C103N).

2-3. Schematic Diagram - Main Section

Presents the primary circuit schematic for the main audio processing and control sections.

2-4. Printed Wiring Boards - Main Section

Shows the layout and connections on the main printed wiring board for component placement.

2-5. Schematic Diagram - Panel Section

Details the circuitry related to the front panel controls and indicators.

2-6. Printed Wiring Boards - Panel Section

Illustrates the printed wiring board layout for the panel section components.

2-7. Schematic Diagram - Power Section

Depicts the circuit diagram for the power supply and related protection circuits.

IC Block Diagrams

Illustrates the internal functional blocks of key integrated circuits used in the amplifier.

SECTION 3 EXPLODED VIEWS

(1) Case, Front Panel Section

Provides a visual breakdown of the front panel and chassis components for assembly/disassembly.

(2) Chassis Section

Shows the exploded view of the internal chassis and related parts for servicing.

SECTION 4 ELECTRICAL PARTS LIST

AC SW and Control Parts List

Lists electrical components for the AC Switch and Control boards.

Control, EON, Function SW, HP, Main Parts List

Lists electrical components for Control, EON, Function SW, HP, and Main boards.

Main Board Parts List

Continues the list of electrical components specifically for the Main board.

Main Board Parts List

Further details electrical components for the Main board.

Main, Relay AC, Relay DC, SIRCS, SP Parts List

Lists electrical components for Main, Relay AC, Relay DC, SIRCS, and SP boards.

Accessories and Packing Materials List

Lists included accessories and packing materials for the unit.

Hardware List

Details the screws and hardware components used in the assembly of the unit.