Sony TC-158SD - Page 8

- TC-158SD |
Muting Switch ($13) Position Adjustment
— Stop mode —
Loosen the adjustment screw and adjust the
switch position so that the gap of the switch
contacts becomes 1.5 0.2mm.
1.540.2mm — muting switch ($13)
contact
record lock plate
Timing Switch (S3) Position Adjustment
— Stop mode —
Loosen the adjustment screws and adjust the
position of the timing switch circuit board in
the arrowed direction so that the muting lever
just starts to pull the slide of the switch.
timing switch
circuit board
muting lever Motor Switch (S12) Position Adjustment
— Stop mode —
Loosen the adjustment screw and adjust the
switch position as shown below.
Pinch Roller Pressure Measurement
brake release
— Playback mode —
1. Pull the spring scale. —
2. Slowly return the pinch roller and read the
spring scale just when the pinch roller starts to
rotate.
5+0.2mm
270-3709 i
19.5—13 oz)| Pring scale