Sony TC-FX211 - Technical Specifications; Recording System and Performance; Power Requirements and Usage

Snag Ne rt rm rs
-Te-FX170
SERVICE MANUAL
US Mode!
Canadian Model
AEP Model
UK Model
E Model
SPECIFICATIONS
Recording system
4-track 2-channel stereo
Fast winding Approx. 120 sec. (with C-60 cassette)
Bias AC Bias | 3
Signal-to-noise ratio (at peak level) |
Dolby NR switch OFF B-TYPE | C-TYPE
| ON ON
TYPE IV (Sony METAL-SLT/S) | 58 dB | 66 dB | 73 dB
TYPE
Il
(Sony
UX-S)
57
dB
|
65
dB
|
72
dB
TYPE | (Sony HF-S) | 55 dB | 63 dB | 70 dB
Total harmonic distortion |
1.0% (with Sony METAL-SLT/S
cassettes)
Frequency response (DOLBY NR OFF)
TYPE IV cassette | 30—15,000 Hz (+3 dB, IEC)
(Sony METAL-SLT/S) | 30-—13,000 Hz [+3 dB OVU
(—4 dB) recording]
TYPE II cassette
30— 14,000 Hz (+3 dB, IEC)
(Sony UX-S)
TYPE I cassette | 30~ 13,000 Hz (+3 dB, IEC
(Sony
HF-S)
oR
,
Wow and flutter +0.16% W. Peak (IEC)
0.11% WRMS (NAB)
+0.2% W Peak (DIN)
Dolby. noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
| “DOLBY” and the double-D symbol DQ) are trademarks of
Dolby Laboratories Licensing Corporation.
MICROFILM
Mode! Name Using Similar Mechanism | TC-FX120
Tape Transport Mechanism Type TCM-180VBN3
Inputs
Line inputs (phono {Sensitivity — 77.5 mV
jacks) | Input impedance |47k ohms
Outputs
0.32 V at a load
impedance of
47k ohms
Line outputs (phono |Rated output
Load impedance: Over 10k ohms
0.2 mW at a load
impedance of 32
ohms |
Headphone output |Output tevel:
(stereo phone jack)
General
Power
requirements
se
ae
US, Canadian Model:
120 V AC, 60 Hz
AEP Mode: | 7
-- 220 V AC, 50/60 Hz
UK Model: _
240 V AC, 50 Hz
Model = eee
110 — 220 V AC, 220 — 240 V
STEREO CASSETTE DECK
so