Sony TC-KA6ES - SECTION 3 MECHANICAL ADJUSTMENTS; Mechanical Adjustment Precautions

2-7. REEL MOTOR BOARD
@ Four screws
(P2.6x6)
2) Reel motor board
SECTION 3
MECHANICAL ADJUSTMENTS
* Refer to page 9 for Adjustment Location.
PRECAUTIONS.
1. Clean the following parts with an alcohol-moistened swab. 2. Demagnetize the record/playback heads, erase heads and
(tape sliding surface) the capstan using the head demagnetizer.
. Do not use a magnetized screw driver for the adjustments.
. After the adjustments, apply suitable locking compound to
Capstan the parts adjusted.
Tape guide (S) . The adjustment should be performed with the rated power
supply voltage unless otherwise noted.
Pinch roller (T) ies :
Pinch roller (S)
Erase heads Record/playback heads