Need help?Do you have a question about the Sony TC-K411 and is the answer not in the manual?
General| Track System | 4-Track, 2-Channel Stereo |
|---|---|
| Motor | DC Servo Motor |
| Tape Type | Normal, CrO2, Metal |
| Signal to Noise Ratio (dolby off) | 56dB |
| Type | Cassette Deck |
| Heads | 1 x erase |
| Frequency Response (Metal) | 30Hz to 17kHz |
| Input | Line Level |
| Output | Line Level |
| Dimensions | 430 x 123 x 306mm |
Advises on preventing fire/shock hazards, unplugging unused units, and handling power cords.
Covers energy conservation, safety mechanisms, and proper cassette insertion.
Details steps to memorize a position using MEMORY and RESET for fast relocation.
Describes how the Auto Play function starts playback after fast winding to the beginning.
Provides a step-by-step guide for recording audio from a source onto a cassette tape.
Guides on setting the optimal recording level using the peak level meter and REC LEVEL control.
Details how to compare input source signal with recorded sound using the MONITOR button.
Explains how Dolby HX PRO improves linearity and reduces distortion in high-range frequency response.
Advises using monitoring to check for distortion from levels or head contamination during recording.
Describes using ATS system and manual calibration for optimal recording conditions.
Provides a step-by-step guide to calibrate bias and recording level using test tones.
Explains adjusting bias for minimum distortion and flat frequency response.
Details compensating for tape sensitivity differences for equal recording/playback levels.
Details cleaning procedures to prevent issues like low sound quality or drop-outs.
Lists common issues with buttons, tape slack, and transport noise with causes and remedies.
Covers issues like no recording/playback, excessive wow/flutter, incomplete erasure, and unbalanced tone.
To Next Page
