To Next PageTo Next Page
Need help?Do you have a question about the Sony TC-K555ES and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Motor | DC Servo Motor |
| Wow and Flutter | 0.04% (WRMS) |
| Type | Cassette Deck |
| Tape Type | Metal |
| Frequency Response | 20Hz - 20kHz (Metal tape) |
| Input | Line |
| Output | Line Out |
| Outputs | Line |
| Inputs | Line |
| Dimensions | 430 x 125 x 350mm |
| Tape Speed | 4.76 cm/s |
| Heads | 3 (Record, Playback, Erase) |
Highlights three-head system, laser amorphous head, and dual-capstan drive.
Details the Dolby C NR system and its benefits over B-type NR.
Covers digital counter, peak meters, remote control, and useful functions.
Outlines methods and limits for checking AC leakage current on exposed metal parts.
Explains how to turn the unit on/off and open the cassette holder.
Guides on selecting tape types and adjusting the bias control.
Details on setting recording levels using peak program meters.
Operation of Dolby NR system switches and MPX filter switch.
Instructions for using the timer function and connecting remote control units.
Details on connecting headphones and adjusting their volume level.
Table of recommended tape types and bias settings for various brands.
Explains bias control function and how to monitor recordings.
Guidance on setting recording levels using peak meters and tape saturation.
Essential precautions to follow before performing mechanical adjustments.
Procedure for measuring and specifying FF/REW torque values.
Detailed steps for adjusting tape path, including curl and wrinkling.
Steps for adjusting head base position after solenoid replacement.
Procedure to adjust clearance between pinch roller and capstan.
Method for measuring pinch roller pressure using a tension gauge.
Procedure for adjusting forward and back tension torque for tape transport.
Steps to adjust tape speed using a speed checker and digital counter.
Specifies standard input and output signal levels for recording.
Procedure for aligning playback head azimuth for optimal signal.
Steps to adjust playback output levels for both channels.
Method to check playback head phase alignment using an oscilloscope.
Procedure for aligning record head azimuth, performed after playback head.
Method to check record head phase alignment.
Procedure for adjusting record bias for optimal tape recording.
Steps to adjust record level for accurate signal transfer.
Procedure for adjusting the bias trap for Type IV tapes.
Steps to calibrate the LED level meters for accurate indication.
Instructions for adjusting Dolby C level output for L-CH and R-CH.
