Sony TC-WR445 - Disassembly Procedures; Front Panel and Voltage Selector Removal; Mechanism Deck Removal; Audio Board and Motor Removal

SECTION 2
DISASSEMBLY
2-3. AUDIO BOARD, REEL MOTOR
Note : Follow the disassembly procedure in the numerical order given.
CASE
Unscrew the four case attachment screws M3 X 8 and
remove the case.
2-1. FRONT PANEL \
FRONTPANEL @-®©
VOLTAGE SELecToR f-@
> © +BTP26x8
@ Capstan motor M1
VOLTAGE
SELECTOR @ Audio board
@ Remove the flat cable.
© Remove the front Panel
Ss
@ -BTP26x6 ee
@ +BIP26x6
2-4. HEAD (A), (B) ASSY, PINCH ROLLER
Remove the cassette holder
2-2. MECHANISM DECK
@ Press the EJECT button.
so © BVTP26x8
=
SNS
©
Pinch
lever
(REV)
assy
@ Tension spring (head)
3) Mechanism deck
@ Cassette lid
© Pinch lever (FWD) assy
@ Head (A), (B) assy