Sony TC-WR645S - Page 5

SECTION 2
DISASSEMBLY 2-3. CAPSTAN MOTOR, REEL MOTOR
: ° ‘ ‘ PTPWH2 x 23
Note : Follow the disassembly procedure in the numerical order given. 0:
CASE
Unscrew the four case attachment screws M3 X 8 and
@ Fitting base
remove the case.
2-1. FRONT PANEL
E Model only
FRONTPANEL @—-®©@
VOLTAGE SELEcToR H—
When installing, pull the FR re)
capstan bell and put and put around claws.
| When installing, pull the
around claws.
VOLTAGE
SELECTOR
@ Remove the flat cable.
© Remove the front Panel @ Claw @ Connectors
@ Capstan motor M1 (DECK-A)
M1 (DECK-B)
Ground plate
@ +826x3 © MD(A)board (DECK-A)
2-2.
MECHANISM
DECK
MD(C)board
(DECK-B)
@
Reel
motor
M2
(DECK-A)
@
Press
the
EJECT
button.
M2
(DECK.B)
Ni” Belt (FR)
Remove the cassette holder @ .P26x28
2-4. HEAD, PINCH ROLLER
3) Claw
@ Cassette lid
© BvVTP26x8
IS y
LoS ae O claw
| eg
A @ Head base assy
HP101(DECK-A)
HRPE101(DECK-B)
Mechanism deck
@ @ BVTP2.6 x 8
@ Lever (pinch lever REV) assy @ Lever (pinch lever FWD) assy —