Need help?Do you have a question about the Sony TC-WR99ES and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.8 cm/s |
| Type | Double Cassette Deck |
| Motor | DC Servo Motor |
| Noise Reduction | Dolby B, Dolby C |
| Inputs | Line In |
| Outputs | Line Out, Headphone |
| Dimensions | 430 x 123 x 300mm |
| Frequency Response | 20 Hz - 20 kHz |
| Wow and Flutter | 0.07% WRMS |
Details on S/N ratio, distortion, and frequency response for various tape types.
Power requirements, dimensions, and weight for different models.
Procedure for testing AC leakage from metal parts to earth ground.
Identification of all controls and indicators on the front panel.
Diagrams and instructions for connecting the unit to audio systems and power.
Diagrams showing the placement of major boards and mechanism assemblies.
Detailed exploded views of cassette holder, capstan, and motor assemblies.
Precautions and procedures for mechanical adjustments like torque measurement.
Initial settings for controls and switches before electrical adjustments.
Procedure for aligning the record/playback head for optimal sound.
Steps to adjust tape speed for high and normal playback modes.
Procedure for adjusting the pitch control for Deck A.
Adjusting playback output levels for L and R channels to specified limits.
Setting record level controls to achieve standard output levels.
Adjusting bias transformers for minimum readings on a voltmeter.
Adjusting record bias for optimal signal levels.
Adjusting the sensitivity for the quick reverse function.
A functional overview of the unit's electronic circuitry.
Diagrams illustrating the physical location of each circuit board within the unit.
Detailed exploded view of the front panel and its components.
Identification of major parts and boards within the chassis.
Detailed list and diagrams for mechanism deck section 1 parts.
Detailed list and diagrams for mechanism deck section 2 parts.
Lists of capacitors and connectors with part numbers and specifications.
Listing of resistors, transistors, diodes, and ICs on the panel.
Continued listing of ICs, diodes, and transistors on the panel.
Continued listing of resistors and fuses on the panel.
Continued listing of resistors on the panel.
Continued listing of resistors on the panel.
Continued listing of resistors, variable resistors, and connectors on the panel.
Continued listing of capacitors, connectors, diodes, and ICs on the panel.
Continued listing of resistors on the panel.
Listing of variable resistors, switches, and other components for the reel motor panel.
List of accessories provided with the unit, such as remote controls and cords.
List of screws and hardware used for assembly and maintenance.
To Next Page
