Sony Trinitron GVM-1311Q - Page 4

Location and Function of Parts and Controls
El ANTS SIZE switch (only RGB A input)
The right picture size and center are fixed in the
VGA modes. The H/V SIZE and H/V SHIFT
controls do not work. For other modes, the picture
size and center are not guaranteed.
OFF: The H/V SIZE and H/V SHIFT controls can be
freely set. The VGA modes have the same picture
size and center.
The above does not apply to RGB B input.
4
@ POWER
$e — STANDBY
V HOLD (vertical hold) control
If the video input picture rolls vertically, use this control
to stabilize it.
Control [2] does not function for RGB input pictures.