Sony Trinitron CPD-G220R User Manual (English)

Other manuals for Sony Trinitron CPD-G220R

Questions and Answers:

B
Brittany TurnerAug 20, 2025
What to do if my Sony Trinitron CPD-G220R picture flickers?
- V
  Veronica CampbellAug 20, 2025
  If your Sony Monitor picture flickers, bounces, oscillates, or is scrambled, try the following: * Isolate and eliminate any potential sources of electric or magnetic fields such as other monitors, laser printers, electric fans, fluorescent lighting, or televisions. * Move the monitor away from power lines or place a magnetic shield near the monitor. * Try plugging the monitor into a different AC outlet, preferably on a different circuit. * Try turning the monitor 90° to the left or right.
K
Kelly McgeeAug 22, 2025
What to do if my Sony Trinitron CPD-G220R has no picture?
- R
  Renee WigginsAug 22, 2025
  If there is no picture on your Sony Monitor, here are a few things to check: * If the power indicator is not lit, ensure the power cord is properly connected and the power switch is in the 'on' position. * If the 'NO INPUT SIGNAL' message appears and the power indicator is orange, verify the video signal cable is properly connected and all plugs are firmly seated. * If the 'MONITOR IS IN POWER SAVE MODE' message appears, or the power indicator is orange, also check the video signal cable and plugs. * You can also use the Self-diagnosis function.
D
Dana OlsonAug 25, 2025
What to do if Sony Monitor screen is blank but power indicator is green?
- J
  Joshua LangAug 25, 2025
  If your Sony Monitor screen is blank and the power indicator is green, try these steps: * Disconnect the video input cable or turn off the connected computer. * Press the power button twice to turn the monitor off and then on. * Move the joystick for 2 seconds. If all four color bars appear (white, red, green, blue), reconnect the video input cable and check the condition of your computer. * If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor’s condition.
R
Rachel YuAug 26, 2025
What to do if Sony Trinitron CPD-G220R 1 (power) indicator is flashing orange?
- K
  kevin07Aug 27, 2025
  If the 1 (power) indicator on your Sony Monitor is flashing orange: * Press the power button twice to turn the monitor off and then on. If the 1 (power) indicator lights up green, the monitor is working properly. * If the 1 (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the 1 (power) indicator and inform your authorized Sony dealer of the monitor’s condition.
P
Paige CarterAug 28, 2025
How to fix fuzzy picture on Sony Monitor?
- L
  lisa71Aug 28, 2025
  If the picture on your Sony Monitor is fuzzy, try the following: * Adjust the brightness and contrast. * Degauss the monitor. * Select MOIRE ADJUST and adjust the moire cancellation effect.
M
Michael GonzalesAug 30, 2025
How to fix ghosting picture on Sony Trinitron CPD-G220R?
- C
  Christopher CollinsAug 30, 2025
  To resolve ghosting issues on your Sony Monitor: * Eliminate the use of video cable extensions and/or video switch boxes. * Check that all plugs are firmly seated in their sockets.
M
Michael JenkinsAug 31, 2025
What does OUT OF SCAN RANGE message mean on Sony Trinitron CPD-G220R Monitor?
- V
  Victor GutierrezAug 31, 2025
  If the 'OUT OF SCAN RANGE' message appears on your Sony Monitor, check that the video frequency range is within that specified for the monitor. If you replaced an old monitor with this monitor, reconnect the old monitor and adjust the frequency range to the following. Horizontal: 30 – 85 kHz Vertical: 48 – 170 Hz.
C
colin01Sep 2, 2025
How to center picture on Sony Trinitron CPD-G220R Monitor?
- L
  Laura MathewsSep 2, 2025
  To center or properly size the picture on your Sony Monitor, adjust the size or centering.
L
lewismariaSep 4, 2025
Why does my Sony Trinitron CPD-G220R make a humming noise after turning on?
- S
  Sara HuffmanSep 5, 2025
  The hum you hear right after turning on your Sony Monitor is the sound of the auto-degauss cycle. When the power is turned on, the monitor is automatically degaussed for five seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. This is not a malfunction.
L
Lauren HernandezSep 6, 2025
How to fix curved edges of the image on Sony Trinitron CPD-G220R Monitor?
- X
  xmelendezSep 6, 2025
  To correct curved edges on the image of your Sony Monitor, adjust the geometry.