Sony Trinitron CPD-E220 User Manual

SERVICE MANUAL
SPECIFICATIONS
CRT 0.24 mm aperture grille pitch (center)
17 inches measured diagonally
90-degree deflection
FD Trinitron
Viewable image size Approx. 327 × 243 mm (w/h)
(14
3
/ 4 × 9
5
/ 8 inches)
16.0" viewing image
Resolution
Maximum Horizontal: 1600 dots (E220/E220E)
Vertical: 1200 lines (E220/E220E)
Recommended Horizontal: 1024 dots
Vertical: 768 lines
Standard image area Approx. 312 × 234 mm (w/h)
(12
3
/ 8 × 9
1
/ 4 inches)
Deflection frequency* Horizontal: 30 to 85 kHz (E220/E220E)
Vertical: 48 to 120 Hz
AC input voltage/current 220 to 240 V, 50/60 Hz, 0.9 A
Power consumption 120 W
Dimensions
Approx. 404 × 413.5 × 419.5 mm (w/h/
d)
(16 × 16
3
/ 8 × 16
5
/ 8 inches)
Mass Approx. 20 kg (44 lb 1 oz)
Plug and Play DDC1/DDC2B/DDC2Bi
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than 3.0 µsec.
• Vertical blanking width should be more than 500 µsec.
Design and specifications are subject to change without notice.
1280 dots (E215E)
1024 lines (E215E)
30 to 70 kHz (E215E)
[CPD-E220]
Equator Model
S. Hemisphere Model
N. Hemisphere Model
Chassis No. SCC-L35B-A
[CPD-E215E]
AEP Model
Chassis No. SCC-L35D-A
[CPD-E220E]
AEP Model
Chassis No. SCC-L35C-A
TRINITRON ® COLOR COMPUTER DISPLAY
CPD-E220/E215E/E220E
H1 CHASSIS

Sony Trinitron CPD-E220 Specifications

General

Display Type	CRT
Max Resolution	1600 x 1200
Refresh Rate	85 Hz
Dot Pitch	0.24 mm
Vertical Refresh Rate	50 - 160 Hz
Bandwidth	150 MHz
Input Signal	Analog RGB
Input Connectors	VGA
Horizontal Refresh Rate	30 - 95 kHz

Summary

Monitor Specifications and Initial Checks

Monitor Specifications

Detailed technical specifications including CRT, resolution, and power consumption.

Safety Check-Out Procedures

Performing safety checks, including AC leakage and component warnings.

Power Saving and Diagnosis Functions

Explanation of power saving modes and the self-diagnosis function.

Timing Specifications

Detailed timing parameters for various display modes.

General Information and Setup Guide

General Precautions and Controls

Safety guidelines, and identification of external parts and controls.

Monitor Setup and Connection

Steps for connecting the monitor, power, and selecting language.

Display Customization and Troubleshooting

Customizing Display Settings

Adjusting brightness, size, color, convergence, and optional settings.

Troubleshooting Common Issues

Solutions for symptoms, remedies, and on-screen messages.

Disassembly and Safety Adjustments

Disassembly Procedures

Step-by-step guide for dismantling the monitor, including boards and CRT.

Safety Related Adjustments

Critical checks and adjustments for high voltage and power circuits.

Adjustments and Technical Diagrams

Picture Calibration and Fine-Tuning

Procedures for picture alignment, convergence, focus, and geometry.

Technical Schematics and Board Layouts

Block diagrams, schematics, and circuit board component locations.

Exploded Views and Parts List

Exploded Views of Assemblies

Visual breakdown of chassis, picture tube, and packing materials.

Electrical Parts Lists

Comprehensive lists of components for the A and H boards.