How to fix Sony Trinitron KV-36HQ100K remote control that is not working?
If the remote control for your Sony TV isn't working, try replacing the batteries first. If that doesn't solve the issue, make sure the remote control is in the correct mode for the device you're trying to control by pressing the > or . button.
Why is the standby indicator flashing on my Sony Trinitron KV-36HQ100K TV?
If the standby indicator on your Sony TV is flashing, and it’s an irregular flash, do not attempt to open the TV. Refer to qualified personnel for assistance. If the flashing is regular, it could be due to EPG data being obtained; wait until the flashing stops. Alternatively, a timer record event may have been set; wait until the recording has ended.
What to do if my Sony Trinitron KV-36HQ100K screen is dark, but the sound is fine?
If your Sony TV displays a poor or no picture (dark screen) but has good sound, go to the ‘Picture Adjustment’ menu and adjust the brightness, picture, and color levels.
How to restore color on my Sony Trinitron KV-36HQ100K?
If your Sony TV is not displaying color on color programs, go to the ‘Picture Adjustment’ menu and adjust the color setting.
Why are some channels blank on my Sony Trinitron KV-36HQ100K?
If some channels appear blank on your Sony TV, it may be due to the channel being scrambled or subscription-only. In this case, subscribe to the pay-per-view broadcaster. It could also be a programme used only for data or not being transmitted. See ‘Programme sorting’ section (refer to page 20).
What to do if my Sony Trinitron KV-36HQ100K TV picture is distorted when changing channels?
If you are experiencing a distorted picture when changing programs or selecting teletext on your Sony TV, switch off all additionally connected equipment.
Why is there good picture but no sound on my Sony TV?
If your Sony TV shows a good picture but has no sound, first, press the + button on the remote control to increase the volume. If that doesn't work, go to the Sound Adjustment menu and ensure that the TV speakers are set to ‘On’.
What to do if my Sony TV has no picture and no sound?
If your Sony TV has no picture or sound, make sure the TV is plugged in and powered on. If the TV is in standby mode, press the power button on the front of the TV or the power ( ) button on the remote control. Also, verify that the aerial is properly connected.
Essential safety warnings and guidelines for operating the television to prevent hazards.
Guide to automatically scan and tune in available television channels.
Guide to scheduling recordings or timed displays using the EPG.
Customizing picture settings like contrast, brightness, colour, and sharpness.
Adjusting sound settings including effects, treble, bass, balance, and volume.
Configuring language, country, tuning, and channel management.
Guide to connecting external devices like VCRs, DVD players, and Hi-Fi to rear ports.
Instructions for connecting devices such as PlayStation, camcorders, and headphones to front ports.
Utilizing the remote's learning feature to copy functions and erase learned ones.
General| Screen Size | 36 inches |
|---|---|
| Display Type | CRT |
| Resolution | 1080i |
| Aspect Ratio | 16:9 |
| Weight | 92 kg |
| Audio | Stereo |
| Remote Control | Yes |
| Inputs | Composite, S-Video, Component |
| Sound Output | 20W |
To Next Page