Sony TRINITRON PVM-1443MD - Page 2

To prevent fire or shock hazard, do not expose the unit to rain
or moisture.
Dangerously high voltages are present inside the unit. Do
not open the cabinet. Refer servicing to qualified personnel
only.
Precautions ....
Features ..........
Location and function of parts and CONtrOIS voces
Front panel
Rear panel
Specifications
precautions
¢ Operate the unit only on 220 - 240 V AC.
e The nameplate indicating operating voltage, power
consumption, etc. is located on the rear.
e Should any solid object or liquid fall into the cabinet,
unplug the unit and have it checked by qualified personnel
before operating it any further.
e Unplug the unit from the wall outlet if it is not to be used for
several days or more.
© To disconnect the AC power cord, pull it out by grasping
the plug. Never pull the cord itself.
e Allow adequate air circulation to prevent internal heat
build-up.
Do not place the unit on surfaces (rugs, blankets, etc.) or
near materials (curtains, draperies) that may block the
ventilation holes.
@ Do not install the unit in a location near heat sources such
as radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
To keep the unit looking brand-new, periodically clean it with
a soft cloth. Stubborn stains may be removed with a cloth
lightly dampened with a mild detergent solution. Never use
strong solvents such as thinner or benzine, or abrasive
cleansers since these will damage the cabinet. As a safety
precaution, unplug the unit before cleaning it.
make an ideal container in which to transport the unit. When
shipping the unit to another location, repack it as illustrated
on the carton.
If you have any questions about this unit, contact your
authorized Sony dealer.