To Next PageTo Next Page
Need help?Do you have a question about the Sony Trinitron PVM-14L2 and is the answer not in the manual?
General| Screen Size | 14 inches |
|---|---|
| Display Type | CRT |
| Aspect Ratio | 4:3 |
| Weight | 15.4 kg |
| CRT Type | Trinitron |
| Input Connectors | S-Video |
| Audio Inputs | RCA |
Essential safety guidelines for operating the unit safely and preventing hazards.
Recommendations for proper installation to ensure adequate ventilation and prevent heat buildup.
Instructions for cleaning the CRT screen safely without damaging the surface.
Guidance on periodic cleaning of the unit to maintain its appearance.
Advice on how to repack the unit for safe transport or storage.
Instructions for mounting the monitor in a rack for proper air circulation.
Details about the Trinitron picture tube, comb filter, and beam current feedback.
Explanation of the comb filter's function for accurate Y/C separation.
Description of the circuit ensuring stable white balance.
Information on the monitor's ability to display both NTSC and PAL signals.
Overview of the different input connectors available for video signals.
Automatic adjustment of chroma and phase for picture quality.
Mode to display only the blue component for color adjustment.
Mode to display picture areas normally outside the screen.
Function to monitor signals with a 16:9 aspect ratio.
Explanation of automatic and manual degaussing functions.
Using menus for picture control, input, and other settings.
Information on optional brackets for mounting in an EIA 19-inch rack.
Details on the optional decoder for displaying closed captions.
Step-by-step guide to connecting the AC power cord to the monitor.
Description of buttons and controls on the monitor's front panel.
Identification and description of connectors and slots on the rear panel.
Displays the current operational status of the monitor.
Adjusts picture white balance using color temperature and gain/bias.
Overview of the various adjustment items available in the on-screen menus.
Fine-tuning picture settings like contrast, brightness, chroma, and phase.
Configures menu language, signal types, and other system settings.
Assigns functions to the parallel remote terminal pins.
Sets parameters for installed optional boards.
Basic product information including CRT type, power, and consumption.
Details on the monitor's peak inrush current characteristics.
Provides the maximum physical dimensions of the monitor in mm and inches.
Lists and describes the various input and output connectors on the monitor.
Details the monitor's output signal capabilities and connector types.
Information on frequency response and aperture compensation for video signals.
Describes aspects of picture quality like normal scan, underscan, and linearity.
Describes the overscan area for normal scanning mode.
Describes the underscan area for picture monitoring.
Specifies linearity tolerances for horizontal and vertical picture display.
Recommended temperature, humidity, and pressure for operation.
Recommended conditions for storing and transporting the monitor.
Lists the accessories included with the monitor.
Defines functions assigned to each pin of the parallel remote terminal.
