PAGE 4
MENU SETTINGS
To change the mode settings in the menu settings, select the menu items with up/down. The default settings can
be partially changed. First, select the icon, then the menu item and the mode.
The POWER which should be set to CAMERA, VCR, or MEMORY. Operate by touching the panel.
1. Press FN to display PAGE1
2. Press MENU to display the menu
3. Press up/down to select a desired icon, then press EXEC.
4. Press up/down to select a desired item, then press EXEC.
5. Press up/down to select a desired setting, then press EXEC.
Repeat step 3 to 5 if you want to change other items. Press RET to return to step 3.
OPERATION BUTTONS ON EACH DISPLAY
When the POWER switch is set to CAMERA,
PAGE1 - SPOT FOCUS, MENU, FADER END SCH, SPOT METER, EXPOSURE
PAGE2 - SELFTIMER, DIGITAL EFFECT, LCD BRIGHTNESS, VOLUME, MEM MIX
PAGE3 - SUPER NIGHTSHOT, COLOR SLW'S
When the POWER switch is set to VCR,
PAGE1 - MENU, LCD BRIGHTNESS, VOLUME, END SEARCH
PAGE2 - PB ZOOM, DIGITAL EFFECT, DATA CODE
PAGE3 - VSPD PLAY, A DUB CONTROL, REC CONTROL
To Previous Page
Loading...
Need help?
General