Sony VPCSA - WIMAX Board Replacement Notes

4-2.Note for WIMAX Board Replacement
When replacing the WIMAX Board (Ref.304 A-1807-784-A/A-1881-561
-
change the barcode label on the bottom.
1. Peel off the barcode label which is attached to the bottom. (Refer to
2 Attach the barcode label which is included with the WWAN Board t
2
.
Attach the barcode label which is included with the WWAN Board t
4
-
-
A/A-1875-893-A/A-1857-707-A/A-1839-995-A/A-1880-010-A),
the figure below.)
Ref.No.304
A-1807-784-A/A-1881-561-A/A-1875-893-A/A-1857-707-A/
A-1839-995-A /A-1880-010-A WIMAX COMBO
WIMAX:XXXXXXXXXXXX
to the position where you peeled off the label in the step
1
to the position where you peeled off the label in the step
1
.
-
2
[Sony Confidential]
VPCSA/SB/SC/SD Series (9-890-859-XX)