Do you have a question about the Sony VPL-FH36 and is the answer not in the manual?
Matrix size | 0.76 \ |
---|---|
Native aspect ratio | 16:10 |
Projection distance | 1.02 - 15.24 m |
Vertical scan range | 48 - 92 Hz |
Horizontal scan range | 15 - 92 kHz |
Projection technology | 3LCD |
Supported aspect ratios | 16:9, 16:10 |
Contrast ratio (typical) | 2000:1 |
Screen size compatibility | 40 - 600 \ |
Projector native resolution | WUXGA (1920x1200) |
Keystone correction, horizontal | -30 - 30 ° |
Projector brightness (economic mode) | 3900 ANSI lumens |
Throw ratio | 1.4 - 2.3:1 |
Optical zoom | 1.6 x |
Zoom capability | Yes |
Focal length range | - mm |
Vertical lens shift range | 0 - 60 % |
Horizontal lens shift range | -32 - 32 % |
Lamp type | UHP |
Lamp power | 330 W |
Light source type | Lamp |
Service life of light source | 2500 h |
Service life of light source (economic mode) | 3500 h |
3D | No |
Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
Analog signal format system | NTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
BNC input ports | 5 |
Serial interface type | RS-232 |
USB 2.0 ports quantity | 0 |
HDCP | - |
Noise level | 40 dB |
Noise level (economic mode) | 35 dB |
On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, KOR, NOR, POL, POR, RUS, SWE, THA, TUR |
Placement | Desktop, Ceiling |
Product type | Standard throw projector |
Product color | White |
Cable lock slot type | Kensington |
Power source | AC |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | 10.4 W |
Power consumption (typical) | 460 W |
Storage temperature (T-T) | -20 - 60 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 10 - 90 % |
Operating relative humidity (H-H) | 35 - 85 % |
Depth | 477 mm |
---|---|
Width | 390 mm |
Height | 148 mm |
Weight | 8300 g |
Identifies and explains the projector's main unit controls and features.
Details how to adjust focus, zoom, lens shift, and projector tilt.
Explains how to correct trapezoidal distortion using the Keystone feature.
Describes how to correct image twist using the warp correction feature.
Introduces the projector's menu system and navigation.
Explains how to adjust picture settings like mode, contrast, brightness, and color.
Details settings for adjusting image size, position, and aspect ratio.
Provides settings for projector installation like image flip and keystone.
Explains how to connect and operate the projector via a network.
Provides guidance on diagnosing and resolving common projector problems.
Step-by-step instructions for replacing the projector lamp.