Touching the headset with sweaty hands, or using the headset in situations where the headset may get soaked in
sweat
Putting the headset in a bag with a cold PET bottle
If the headset gets wet, or water enters the headset
If a wet headset is charged or turned on, this can result in burnout or malfunction. While subjecting the headset to as
little vibration as possible, turn the earpads downward slowly, and let water drain from the earpads. Then, position the
headset upright and put a dry cloth under the USB Type-C port until no more water comes out from the inside. After that,
leave the headset in a shaded, well-ventilated place until it is completely dry.
To Next Page
