Help Guide
Wireless Noise Canceling Stereo Headset
WI-SP600N
How to make a wireless connection to Bluetooth devices
You can enjoy music and hands-free calling with the headset wirelessly by using your device’s Bluetooth function.
Device registration (pairing)
When using the Bluetooth function for the first time, you must previously register both devices to allow connection. The
operation to register a device is called device registration (pairing).
If the device to be connected does not support the one-touch connection (NFC), operate the headset and the device to
perform device registration (pairing).
If the device supports one-touch connection (NFC), you can just touch to perform device registration (pairing) and
establish a Bluetooth connection.
Connecting the headset to a registered (paired) device
Once the device is registered, it is not necessary to register it again. Connect to it with an appropriate method.
4-730-313-11(1) Copyright 2018 Sony Corporation
To Next Page
Loading...
Need help?
General
