Help Guide
Wireless Noise Canceling Stereo Headset
WI-SP600N
Functions for a phone call
The available functions may vary depending on the profile supported by your smartphone or mobile phone. Even if the
profile is the same, functions may vary depending on the smartphone or mobile phone.
Refer to the operating instructions supplied with your smartphone or mobile phone.
Supported profile: HFP (Hands-free Profile)
During standby/music playback
Press and hold the
button for more than 2 seconds to start the voice dial function of the smartphone/mobile phone
(*), or activate the Google App of the Android device or Siri of the iPhone.
Outgoing call
Press the
button once to cancel an outgoing call.
Press and hold the
button for about 2 seconds to change the call device between the headset and the
smartphone or mobile phone.
Incoming call
Press the
button once to answer a call.
Press and hold the
button for about 2 seconds to reject a call.
During call
Press the
button once to finish a call.
Press and hold the
button for about 2 seconds to change the call device between the headset and the
smartphone or mobile phone.
Supported profile: HSP (Headset Profile)
Outgoing call
Press the
button once to cancel an outgoing call. (*)
Incoming call
Press the
button once to answer a call.
During call
Press the
button once to finish a call. (*)
Related Topic
Receiving a call
Making a call
4-730-313-11(1) Copyright 2018 Sony Corporation
Some devices may not support this function.
*
To Next Page
Loading...
Need help?
General
