EasyManuals Logo

Sony WI-XB400 User Manual

Sony WI-XB400
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
USB AC adaptor
A commercially available USB AC adaptor capable of supplying an output current of 0.5 A (500 mA)
Personal computer
Personal computer with a standard USB port
We do not guarantee operation on all computers.
Operations using a custom-built or homebuilt computer are not guaranteed.
Hint
The headset can be also charged by connecting the headset to a running computer using the supplied USB Type-C cable.
If charging starts while the headset is turned on, the headset will turn off automatically.
Note
Charging may not be successful with cables other than the supplied USB Type-C cable.
Charging may not be successful depending on the type of USB AC adaptor.
When the headset is connected to an AC outlet or computer, all operations such as turning on the headset, registering or
connecting to Bluetooth devices, and music playback cannot be performed.
The headset cannot be charged when the computer goes into standby (sleep) or hibernation mode. In this case, change the
computer settings, and start charging the headset once again.
If the headset is not used for a long time, the rechargeable battery usage hours may be reduced. However, the battery life will
improve after a few recharges. If you store the headset for a long time, charge the battery to its full capacity once every 6 months
to avoid over-discharge.
If the headset is not used for a long time, it may take longer to charge the battery.
If the headset detects a problem while charging due to the following causes, the indicator (red) flashes. In this case, charge once
again within the charging temperature range. If the problem persists, consult your nearest Sony dealer.
Ambient temperature exceeds the charging temperature range of 5 °C - 35 °C (41 °F - 95 °F).
There is a problem with the rechargeable battery.
If the headset is not used for a long time, the indicator (red) may not immediately light up when charging. Please wait a moment
until the indicator (red) lights up.
If the usage hours of the built-in rechargeable battery decrease significantly, the battery should be replaced. Consult your nearest
Sony dealer to replace the rechargeable battery.
Avoid exposure to extreme temperature changes, direct sunlight, moisture, sand, dust, and electrical shock. Never leave the
headset in a parked vehicle.
When connecting the headset to a computer, use only the supplied USB Type-C cable, and be sure to directly connect them.
Charging will not be properly completed when the headset is connected through a USB hub.
5-004-986-11(1) Copyright 2019 Sony Corporation
15

Table of Contents

Other manuals for Sony WI-XB400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony WI-XB400 and is the answer not in the manual?

Sony WI-XB400 Specifications

General IconGeneral
Battery typeBuilt-in battery
Standby time200 h
Wireless chargingNo
Rechargeable batteryYes
Battery recharge time3 h
Continuous audio playback time15 h
Impedance- Ω
Driver typeDynamic
Driver unit12 mm
Magnet typeNeodymium
Ear couplingIntraaural
Headphone frequency20 - 20000 Hz
USB connectorUSB Type-C
Frequency band2.4 GHz
Wireless range10 m
Bluetooth version5.0
Bluetooth profilesA2DP, AVRCP, HFP, HSP
Connectivity technologyWireless
Quantity1
Cable length0.2 m
Product colorBlue
Wearing styleNeck-band
Volume controlButtons
Country of originVietnam
Recommended usageCalls/Music
Microphone typeBuilt-in
Microphone frequency- Hz
Microphone sensitivity- dB
Package depth41 mm
Package width91 mm
Package height180 mm
Package weight150 g
Harmonized System (HS) code85183000
Weight and Dimensions IconWeight and Dimensions
Depth40 mm
Width93 mm
Height155 mm
Weight21 g

Related product manuals