No color/Dark picture/Color is not correct/Picture is
too bright.
Check the antenna/cable connection.
Connect the TV to the AC power (mains), and press the power button on the TV or the
remote control.
Press the (Quick Settings) button on the remote control, and select [Settings] —
[Display & Sound] — [Picture] to make adjustments.
For details, refer to Adjusting the picture quality page.
Press the (Quick Settings) button on the remote control, and check [Brightness] and
[Power saving] on the Quick Settings screen.
You cannot set [Brightness] when [Power saving] is set to [High]. Change the [Power
saving] setting.
Note
Picture quality depends on the signal and content.
The picture quality may improve if you change it in [Picture] under [Settings].
Press the (Quick Settings) button on the remote control, and select [Settings] —
[Display & Sound] — [Picture] — [Brightness], and adjust [Brightness] or [Contrast].
Related topics
Display & Sound
[102] Picture (quality)/screen | Picture (quality)/screen
Distorted picture./The screen flickers.
Check the connection and position of the antenna and
peripheral devices
Check the antenna/cable connection.
Keep the antenna/cable away from other connecting cables.
When installing an optional device, leave some space between the device and the TV.
Make sure that the antenna is connected using a high quality 75-ohm coaxial cable.
To Next Page
Loading...
