Adjusts the balance so it sounds as if you are viewing from the front of the TV even if are actually
not.
[Proximity Alert]
Notifies you if the TV viewing distance is too close. It reminds children not to touch the
TV or watch too close.
You must input your PIN to enable this feature. When enabled, it will be set at 1 m
(default). You can select [Set distance] to set any distance.
[Auto power saving mode]
Automatically switches to power saving, such as reduced brightness, when a user is
not detected in front of the TV for a certain period of time.
[Gesture Control]
Allows use of gestures toward the TV to turn the TV on or off, adjust the volume,
change the channel, or play back content.
Future software updates may be required to use some features.
Some of the Camera sensing functions added by software updates are added to Quick
Settings, and you can turn On/Off features such as [Auto adjust picture and sound].
For details about software updates, see the Software updates page.
Hint
[BRAVIA CAM] in the Camera and Microphone Unit has features available in addition to
Camera sensing functions. Configure them as necessary.
With Camera sensing functions, camera images are not sent to the network, but you
can erase the data collected by the Camera and Microphone Unit and reset Camera
sensing functions.
[Settings] — [Remotes & Accessories] — [BRAVIA CAM] — [Clear data]
To turn off the LED of the Camera and Microphone Unit, disable the following
setting.
[Settings] — [Remotes & Accessories] — [BRAVIA CAM] — [Camera activity LED]
However, the LED stays on (does not turn off) during video chat, during Gesture
Control, or while updating the Camera and Microphone Unit.
Updating the software of the Camera and Microphone Unit may be required. To
check for software updates, select the following in order.
[Settings] — [Remotes & Accessories] — [BRAVIA CAM] — [Software update]
*
*
*
*
To Next Page
Loading...
