1
2
3
1
2
3
Bluetooth A2DP-supported models that support Bluetooth audio devices have [A/V sync]
in [Settings] — [Display & Sound] — [Audio output].
Turn the Bluetooth device on and put it in pairing mode.
To put your Bluetooth device in pairing mode, refer to the instruction manual
of the device.
Press the (Quick Settings) button on the remote control, then select
[Settings] — [Remotes & Accessories] — [Pair accessory] to put the TV in
pairing mode.
Available Bluetooth devices will be displayed.
Select the desired device, then follow the on-screen instructions.
If you are prompted to enter a passcode, refer to the instruction manual of
the device.
After pairing is completed, the device connects to the TV.
To connect to a paired Bluetooth device
Press the (Quick Settings) button on the remote control, then select
[Settings] — [Remotes & Accessories].
Select a paired but unconnected device.
Select [Connect].
Related topics
Supported Bluetooth profiles
Operation cuts out, or a device does not work.
You want to output sound from the headphones/Bluetooth audio device and audio
system/TV speakers at the same time.
[61] Bluetooth devices | Bluetooth devices
Adjusting the AV sync setting
To Next Page
Loading...
