Sony XM-3040F - User Manual

SERVICE MANUAL
XM-3040F
US Model
Canadian Model
AEP Model
UK Model
E Model
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION 30
watts per channel minimum continuous average power into 4
ohms, both channels driven from 20-20,000Hz with no more
than 0.08% total harmonic distortion per Car Stereo Ad Hoc
Committee standards.
Other Specifications
Power supply system
Input
Outputs
Speaker impedance
Maximum power output
Frequency response
Crossover frequency
Crossover slope
Harmonic distortion
Input level adjustment
range
Power requirements
Current drain
Input remote current
Pulse power supply circuitry
Car stereo input (phono jack)
Speaker outputs
2-8 ohms
4ch: 80wattsx4 at 4ohms
3ch : 80 wattsx2+180 watts at
4 ohms
2ch: 180 wattsx2 at 4ohms
8Hz—100kHz2$dB (4 ohms)
High Pass Filter 80Hz
Low Pass Filter 80Hz
High Pass Filter 18dB/oct
Low Pass Filter 18dB/oct
0.005%
0.1-2V
12V DC car battery
(negative ground)
28A (at rated output)
5mA
Dimensions Approx. 310 X55 x 220mm
(w/h/d)
(12% x2%x7 inches)
Weigh Approx. 3.75kg (8 lb. 40 oz.)
Accessories supplied Mounting screws (4)
Design and specifications subject to change without notice.
Level Adjustment Control
The input level can be varied with this control.
Use it to adjust the input sound level when using
source equipment of other manufacturers.
Be sure to set the control to SONY STD if the
unit is connected to a SONY car stereo. Turn it
to 0.1V when the input level of the cassette car
stereo or CD player seems low.
STEREO POWER AMPLIFIER
SONY.

Sony XM-3040F Specifications