SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
XM-GTX6040
SPECIFICATIONS
STEREO POWER AMPLIFIER
9-889-574-01
2009F04-1
©
2009.06
US Model
Canadian Model
Ver. 1.0 2009.06
Other Specifi cations
Circuit system OTL (output transformerless) circuit
Pulse power supply
Inputs RCA pin jacks
High level input connector
Input level adjustment range
0.3 – 6 V (RCA pin jacks),
2.8 – 12 V (High level input)
Outputs Speaker terminals
Speaker impedance 2 – 8 Ω (stereo)
4 – 8 Ω (when used as a bridging amplifi er)
Maximum output 4 Speakers: 110 W × 4 (at 4 Ω)
3 Speakers: 150 W × 2 (at 2 Ω) +
300 W × 1 (BTL, at 4 Ω)
Rated output (supply voltage at 14.4 V, 20 Hz – 20 kHz, 1 % THD)
4 Speakers:
60 W × 4 (at 4 Ω)
70 W × 4 (at 2 Ω)
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
60 watts per channel minimum continuous average power into 4 ohms,
both channels driven from 20 Hz to 20 kHz with no more than 1 % total
harmonic distortion per Car Audio Ad Hoc Committee standards.
Frequency response 5 Hz – 50 kHz ( dB)
Harmonic distortion 0.05 % or less (at 1 kHz, 4 Ω)
Low-pass fi lter 80 Hz, 18 dB/oct
High-pass fi lter 80 Hz, 12 dB/oct
Power requirements 12 V DC car battery (negative ground)
Power supply voltage 10.5 – 16 V
Current drain at rated output: 33 A (4 Ω, 60 W × 4)
Remote input: 1 mA
Dimensions Approx. 384 × 55 × 252 mm
(15
1/8 × 2 1/4 × 10 in) (w/h/d) not incl.
projecting parts and controls
Mass Approx. 2.9 kg (6 lb 7 oz) not incl. accessories
Supplied accessories Mounting screws (4)
High level input cord (1)
Protection cap (1)
Design and specifi cations are subject to change without notice.
+0
–3