Sony XM-GTX6040 Specifications

The XM-GTX6040 amplier aord incredible installation exibility and
packs quite a punch. GTX ampliers oer tremendous value including
convenience features such as: modern cosmetics, variable cross-overs,
multiple channel congurations and singe-side electrical connections to
suit almost any application.
Rated Power 4 Ohm Stereo
60W x 4 RMS (20Hz-20kHz, 1% THD+N, 4 Ohm, 14.4V)
1
Maximum Power 4 Ohm Stereo
This unit has a maximum output power of 110W per channel at 4 Ohm.
Rated Power 2 Ohm Stereo
70W x 4 RMS (20Hz-20kHz, 1% THD+N, at 2 Ohm, 14.4V)
Maximum Power 2 Ohm Stereo
This unit has a maximum output power of 150W per channel at 2 Ohm.
Rated Power 3-channel Mode
60W x 2 RMS + 130W x 1 (20Hz-20kHz, 1% HD+N, 4 Ohms, 14.4V)
High Level Input
Direct connection (High Level Input)can be made with the speaker output of your car audio unit
if it is not equipped with RCA line output. High Level Sensing power on feature allows the unit to
be activated without the need for remote connection.
Internal Crossover
Built in selectable 12 dB/Oct 80Hz HPF for front and 18dB/Oct 80Hz LPF for rear.
Specications
Amplier Section
Max power output
600W max power
Power Ad Hoc
60W per channel at 4 Ohms from 20Hz-20kHz with 1% THD
1
Speaker Impedance
2-8 Ohm stereo
4-8 Ohms mono
Audio
Band
Low Pass Filter: 80 HZ, -18dB/oct
High Pass Filter: 80 HZ, -12dB/oct
Circuit System
OTL Output Transformerless Circuit
Pulse Power Supply
Frequency Response
5-50kHz (+0/-3 dB)
Harmonic Distortion
0.05% or less (at 1 kHz, 4 ohm)
Impedance
2-8 Ohms Stereo,
4-8 Ohms Mono
Input Level
0.3 - 6.0V (RCA input)
2.8 - 12.0V (High Level Input)
Noise Level
93 dBA
Power Supply
OTL Output Transformerless Circuit
Pulse Power Supply
Audio Features
Level Control
High Level Input: 2.8 - 12V
Inputs and Outputs
Audio In
RCA Pin Jacks, High Level Input Connector
XM-GTX6040
4/3 Channel GTX Series Amplier

Sony XM-GTX6040 Specifications

General

Amplifier class	-
Frequency range	5 - 50000 Hz
RMS rated power	600 W
Input sensitivity	300 mV
Audio output channels	4.0 channels
Peak power per channel	110 W
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	1 %
RMS power output per channel (2 Ohm)	70 W
RMS power output per channel (4 Ohm)	60 W
Bridge-mode power output per channel (4 Ohm)	140 W
Speakers connectivity type	RCA
Purpose	Car
Product color	Black
Connectivity technology	Wired
Maximum current	33 A

Weight and Dimensions

Depth	252 mm
Width	384 mm
Height	55 mm
Weight	2900 g